Ccna Collab Civnd 210-065 | Videoconferencing | Closed Circuit Television

Cisco 210-065

Implementing Cisco Video Network Devices v1.0
Version: 5.0

Cisco 210-065 Exam
Topic 1, Video Concepts
QUESTION NO: 1
Which four features are provided by Cisco TelePresence Management Suite? (Choose four.)
A. Scheduling of video conference calls
B. Built-in-bridge functionality for multiparty video conferences
C. SIP-H.323 protocol interworking
D. Centralized management of conference resources
E. SMTP email event notification
F. Endpoint configuration backup and restore
G. Cisco TelePresence endpoint automated redundancy
H. Automated resource optimization
Answer: A,D,E,F
Explanation:

QUESTION NO: 2
Which three features are supported by Cisco TMSPE? (Choose three.)
A. Simplified provisioning
B. LDAP user import
C. Scheduling via Microsoft Outlook
D. FindMe
E. Jabber for Windows
F. Automatic endpoint upgrades
Answer: A,B,D
Explanation:

QUESTION NO: 3
Management wants to modify Cisco TMS to allow users to configure the call behavior with their
associated devices and dial from a single ID. Which feature needs to be enabled and configured?
A. Smart Scheduler
B. Low-touch Provisioning
C. FindMe
D. CMR Provisioning
"Pass Any Exam. Any Time." - www.actualtests.com

2

Cisco 210-065 Exam
Answer: C
Explanation:

QUESTION NO: 4
Refer to the exhibit.

Which configuration item shown in the exhibit should be used to assign the internal and external
video communication server address for this group of users?
A. User Settings > Video Address pattern
B. Administrative Tools > User Settings
C. Configuration Template > Edit Template
D. User Import > Configuration
Answer: C
Explanation:

Topic 2, Endpoint Configuration
QUESTION NO: 5
A network engineer wants to automate the monitoring of Cisco TelePresence TX systems. Which
step should the engineer take first?
"Pass Any Exam. Any Time." - www.actualtests.com

3

Cisco 210-065 Exam
A. Configure Cisco TMS on the codec.
B. Configure Medianet on the codec.
C. Configure NTP on the codec.
D. Configure Multiway on the codec.
E. Configure SNMP on the codec.
Answer: E
Explanation:

QUESTION NO: 6
A technician is tasked with performing a room readiness assessment in preparation for an
immersive video endpoint. What are three Cisco best practices regarding lighting
recommendations for the room? (Choose three.)
A. The bulb temperature should be between 4000 and 4100K.
B. Key lighting should be between 200 and 400 Lux with the endpoint powered on.
C. Shoulder lighting should not exceed two times the facial lighting values with the endpoint off.
D. Use direct lighting fixtures.
E. Within the camera field of view, the lighting for all parts of the room should not fluctuate more
than 100 Lux.
F. Avoid using dimming light control systems.
Answer: A,C,E
Explanation:

QUESTION NO: 7
Refer to the exhibit.

"Pass Any Exam. Any Time." - www.actualtests.com

4

Cisco 210-065 Exam

A network engineer configures a Cisco Unified Communications Manager and VCS integration via
a SIP trunk. Endpoint A is able to conduct video calls to Endpoint B. When Endpoint A attempts to
share presentation content with Endpoint B, Endpoint B sees the presentation video on the main
screen rather than on the presentation display. What is the cause?
A. The default MTP telephony payload is incorrect.
B. The SIP trunk is not running on all active Cisco Unified Communications Manager nodes.
C. MTP is not forced to be required.
D. BFCP is not enabled.
E. The MTP preferred codec is incorrect for content presentation.
Answer: D
Explanation:

QUESTION NO: 8
Which three features does Cisco VCS provide? (Choose three.)

"Pass Any Exam. Any Time." - www.actualtests.com

5

BFCP B.www.com 6 . H. RDP Answer: A. native scheduling D. SIP trunk integration with Cisco Unified Communications Manager E. Any Time.323 interworking functionality C.B Explanation: "Pass Any Exam. reverse proxy functionality Answer: B. native Cisco SCCP telephonyi integration B. third-party standards-based H.239 C. Configuration > System Configuration > Provisioning > Set the External Manager Address Answer: D Explanation: QUESTION NO: 10 Which two protocols can be used with the Cisco TelePresence Content Server to allow users to share content from their laptops? (Choose two. Switched Presentation E. Which path will allow the engineer to complete this configuration? A. Network Services > TFTP > DHCP RequestTFTPServerAddress > Off D.) A.E Explanation: QUESTION NO: 9 A Unified Communications engineer wants to configure a Cisco TelePresence SX endpoint using static IP addressing to use a different TFTP server." . PCoIP D.actualtests.D. Network > TFTP > DHCP RequestTFTPServerAddress > Off C. Network Services > Network 1 > DHCP RequestTFTPServerAddress > Off B. SIP-H. SCCP F.323 and SIP device registration F.Cisco 210-065 Exam A.

Administrative Tools > TMS Server Maintenance > Download Diagnostic Files "Pass Any Exam. The Touch 8 is connected via the second Ethernet port on the codec. Pairing visibility mode is not active on the codec. Any Time. Cascading E.com 7 .F Explanation: Topic 3.) A. Support for Conductor G." . Cluster sizes of more than 5 servers D.1. Active presence for all devices F.C Explanation: QUESTION NO: 13 Cisco TMS is unable to manage endpoints and an engineer is required to capture logs to determine the cause.D. The codec is not compatible with a Touch 8 device. Answer: B. D. E. C. Native scheduling capabilities Answer: B.) A. Troubleshooting and Support QUESTION NO: 12 A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint. What are two possible reasons for this behavior? (Choose two. but the codec is not automatically listed in the touch panel.actualtests. B. ClearPath C. auto-attendant B. The codec and the Touch 8 are on separate subnets. Administrative Tools > Diagnostics > TMS Tickets B. What is the menu path that the engineer should follow to capture and download logs from Cisco TMS? A.E.www.Cisco 210-065 Exam QUESTION NO: 11 Which four features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode? (Choose four. The codec firmware version is below version TC 6.

Systems > Navigator > TMS Logs Answer: B Explanation: QUESTION NO: 14 An engineer is creating a system backup on a Cisco VCS. D.) A.com 8 . Any Time. status D. C. xstatus B. E. The backup is valid for 30 days. The backup is stored in Cisco TMS. Which two options describe characteristics of Cisco VCS backups? (Choose two." . show network eth0 C. The backup is only downloadable locally.www. The backup can be sent to additional servers in the cluster. Which command should be entered? A. help static Answer: C Explanation: QUESTION NO: 16 The firmware for the primary codec of a Cisco TelePresence System 3010 is being upgraded.actualtests. Systems > Navigator > Diagnostics > Download Diagnostic Files D.F Explanation: QUESTION NO: 15 A technician has installed and powered on a Cisco TelePresence MCU 5320 and is connected via the console port. The backup can be sent to the remote SFTP server. The technician needs to determine the IP settings that were automatically assigned via DHCP. Which codec CLI command could be used to check on the progress of the update? "Pass Any Exam. F. Answer: B.Cisco 210-065 Exam C. B. The backup can be encrypted with a password.

Conferencing Concepts QUESTION NO: 18 A large company wants to procure video conference devices that allow multipoint conferences from C-Series and immersive endpoints that are registered to a Cisco VCS and Cisco Unified Communications Manager. Which two components meet the requirements of this company? (Choose two. D. Use the Cisco TelePresence VCS web user interface. and enter the new password when prompted. show upgrade detail D. choose Administration > System Settings." How can this security warning be addressed? A. Cisco C-Series endpoint with a multisite option key registered to Cisco Unified Communications Manager "Pass Any Exam. Cisco TelePresence Multipoint Switch registered to Cisco VCS B. Use SSH to log in to the Cisco TelePresence VCS as Root. issue the command set password. C. and enter the new password when prompted. Use SSH to log in to the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passwd. Cisco TelePresence Server registered to Cisco VCS D. E. show system upgrade Answer: C Explanation: QUESTION NO: 17 A Cisco TelePresence VCS displays this alarm: "Root password is set to default.www. Cisco C-Series endpoint with a multisite option key registered to Cisco VCS C. utils system version C. B. utils upgrade display B.com 9 .actualtests. and change the root password.) A. issue the command passwd. Any Time. choose Administration > User Settings. Use SSH to log in to the Cisco TelePresence VCS as Root." . and change the root password. Use the Cisco TelePresence VCS web user interface.Cisco 210-065 Exam A. Answer: D Explanation: Topic 4.

ad hoc conference C.com 10 . Answer: B. rendezvous conference D." .D Explanation: QUESTION NO: 20 Management would like to set up a permanent recurring Cisco TelePresence meeting where the team would dial into to a preconfigured number. multiway conference Answer: C Explanation: Topic 5. Use the Conference settings from the codec web interface. C. D. Which two options describe how to switch the local layout view without affecting the view of remote users? (Choose two. Any Time. Use the Participant settings from the MCU 5300 web interface. E. Mix Questions QUESTION NO: 21 When scheduling a multipoint conference. Use the Administrator settings from the local touch control. scheduled conference B.actualtests. Use the Call Control settings from the codec web interface. which three devices are required for the conference to "Pass Any Exam. Use the Call settings from the remote control.) A.E Explanation: QUESTION NO: 19 A video conference user that is connected via a Cisco TelePresence Codec C40 to a conference that is hosted on a Cisco TelePresence MCU 5300 would like to switch the local layout view.Cisco 210-065 Exam E. Cisco TelePresence Multipoint Switch trunked to Cisco Unified Communications Manager Answer: C. B. Which meeting type should be used? A.www.

www.) A. Cisco Video Surveillance Operations Manager C.C Explanation: QUESTION NO: 22 Which of these is the core component of the Cisco Video Surveillance product suite that handles recording and serving of video feeds? A. Cisco Unified Communications Manager B. multipoint control unit C. Cisco Unified IM and Presence Answer: A. Cisco Video Surveillance Media Server Answer: D Explanation: QUESTION NO: 23 Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server? A. Cisco Video Surveillance Operations Manager D. video conferencing endpoints D. Cisco Video Surveillance Virtual Matrix Answer: B Explanation: QUESTION NO: 24 "Pass Any Exam." . Cisco IP camera C. Video Communications Server B. Cisco Video Surveillance Transcoding and Encoding Server E.Cisco 210-065 Exam be scheduled and completed successfully? (Choose three.actualtests. Any Time.com 11 . Video Communications Server B. Cisco Video Surveillance Media Server D. Cisco Unity Connection E.B.

" .www. expandable storage space C. the ability to encrypt raw video signals to secure video signals Answer: A Explanation: QUESTION NO: 25 Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two. scalability E. physical security D. analog to IP conversion B. Any Time. the ability to stream digital media to digital media in an IP-enabled video recording environment D. large.D Explanation: QUESTION NO: 26 Which Cisco Video Surveillance device is responsible for providing video streams to monitors after the respective layouts and views are received by the monitors? A. Cisco Video Surveillance Manager D. the ability to convert low-resolution video to high-definition video for video surveillance C. the ability to use existing analog equipment with an IP-enabled video surveillance system B. Cisco IP Video Surveillance Virtual Matrix Viewer C. Cisco Video Surveillance Media Server Answer: D Explanation: QUESTION NO: 27 "Pass Any Exam.com 12 .) A.Cisco 210-065 Exam Cisco Video Surveillance Video Encoder cards perform which function? A. Cisco IP Video Surveillance Operations Manager B.actualtests. faster bit rate for storage Answer: B.

C Explanation: QUESTION NO: 29 Refer to the exhibit.Cisco 210-065 Exam Which of these involves combining visual elements from separate sources into a single image? A. interlacing B. compositing C. interleaving Answer: B Explanation: QUESTION NO: 28 Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two. Cisco Video Surveillance Operations Manager C. Cisco TelePresence Management Suite D.) A. "Pass Any Exam. video conferencing D. Cisco TelePresence Multipoint Control Unit E.actualtests.com 13 .www. Cisco Video Surveillance Management Server Answer: A. Cisco TelePresence Manager B. Any Time." .

badges C. Using the information in the exhibit. D.B. Any Time. The Cisco TelePresence profile systems do not support dual display. doors B. why is the second display not displaying anything from the system? A. C. height F. so either the display is not cabled correctly." .actualtests. age D. or there is no input being sent to the display. After powering up the entire system.www. The dual display option key has not been input into the codec. The codec has the appropriate option keys installed.F Explanation: "Pass Any Exam. weather E.Cisco 210-065 Exam You have just finished installing a 65-inch dual profile system in a multipurpose room. only one display is used. fingerprints Answer: A. the codec is configured incorrectly.com 14 . The display is not powered on. Answer: D Explanation: QUESTION NO: 30 Threat monitoring in physical access security can be based upon which three of these? (Choose three. B.) A.

The system does not require any additional requirements above the normal HVAC requirements for the room.5 and 2.0 meters (10 and 15 feet) "Pass Any Exam.www.2 meters and 1. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building.8 meters (4 and 6 feet) D. D.actualtests. 0. You must supply a room that has energy-efficient lighting to reduce the temperature of the room. an Ethernet cable (RJ45-to-RJ45) C. You must supply additional cooling requirements for the room.0 and 5. the camera can adjust automatically B. an Ethernet crossover cable (RJ45-to-RJ45) B. 3. a serial cable (DB25-to-DB9) D. a VISCA cable (DB9-to-RJ45) Answer: D Explanation: QUESTION NO: 32 Which statement is true about the Cisco TelePresence System 500-32 system regarding the HVAC needs for the room where it is installed? A.5 meters and 0. B. what type of cable must be used for camera control? A.75 meters (1." . Any Time. C.5 feet) C. Answer: A Explanation: QUESTION NO: 33 What is the optimum distance for a person sitting using the Cisco TelePresence System 500? A.com 15 . 1.Cisco 210-065 Exam QUESTION NO: 31 When connecting to a pan-tilt-zoom camera to a C-Series codec.

Active Directory IPv4 address F." . unique NTP server IPv4 address Answer: B.B.com 16 . unique E. unique system ID B.) A.D Explanation: QUESTION NO: 35 Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.D Explanation: QUESTION NO: 36 Which two additional items must be configured for an endpoint to register manually with the Cisco "Pass Any Exam. Cisco VCS IPv4 address E. unique H. SMTP server IPv4 address Answer: A.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four. default gateway D. which four network items must be configured for the endpoint to be able to register with H. subnet mask C.323 ID C. unique DNS entry ID D.) A.www. Any Time. unique IPv4 address B.323 to function correctly? (Choose two.C. unique real-time transport protocol port numbers F.Cisco 210-065 Exam Answer: C Explanation: QUESTION NO: 34 You have installed a C-Series endpoint in an office where DHCP is not supported.actualtests.164 alias E. At a minimum.

Option 150 is not important. Answer: B Explanation: QUESTION NO: 38 Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS? A. Allow presentation sharing using H.com 17 . C. Allow iX application media B.D Explanation: QUESTION NO: 37 What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints? A.) A. Deliver conference bridge identifier "Pass Any Exam. E. E. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.actualtests. It is the configured SIP registrar and proxy server. unique system ID Answer: C. Send send-receive SDP in mid-call invite C. configured SIP registrar and proxy server E. B. SIP uniform resource indicator D. Any Time.235 E. It is the IPv4 address of the default gateway for the subnet that the video endpoint is connected to. Allow presentation sharing using BFCP D.164 alias B. NTP server IPv4 address F.www.323 ID C.Cisco 210-065 Exam TelePresence Video Communication Server for the SIP to function correctly? (Choose two. D." . H. It is the unique NTP server IPv4 address.

The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge. B.com 18 ." . C. right. Only zoom-in and zoom-out are available. C. Only up and down are available.www. B. up. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and nonimmersive endpoints.actualtests. Answer: A Explanation: QUESTION NO: 40 When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System Codec C40. E. whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms. Answer: E Explanation: QUESTION NO: 41 Which statement is correct regarding the difference between Multisite and Multiway conferencing? "Pass Any Exam. and zoom-out are all available. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching. No FECC is available. down. The Cisco TelePresence Multipoint Switch is a hardware bridge for nonimmersive endpoints. D. zoom-in. The Cisco TelePresence Multipoint Switch provides active presence. D. Only left and right are available. Any Time. which FECCs are available? A.Cisco 210-065 Exam Answer: C Explanation: QUESTION NO: 39 What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch? A. Left.

D.Cisco 210-065 Exam A. Multisite requires configuration on the endpoint.www. "Pass Any Exam. Any Time.com 19 ." . Multisite is used to conference in multiple sites. whereas Multiway is intrasite multipoint conferencing. Multisite requires the Multisite options key to be installed and configured at the endpoint. B. whereas Multiway requires the Multiway options key to be installed. Multisite requires the presence of a multipoint control unit. whereas Multiway relies on the endpoint conferencing capability. Answer: D Explanation: QUESTION NO: 42 Refer to the exhibit. C. whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit.actualtests.

Any Time.actualtests.Cisco 210-065 Exam Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose "Pass Any Exam." .www.com 20 .

) A. whereas Cisco Jabber Video for TelePresence has presence capabilities. Cisco Jabber has no video calling capabilities. B. The Cisco Jabber initial audio and video settings need to be set. D. D. E.164 H323Alias has not been configured on the endpoint. The H. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager." .D Explanation: QUESTION NO: 44 What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence? A.) A. Answer: B.323 license stack is not added to the endpoint. C.www.D Explanation: QUESTION NO: 43 Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint running in H.Cisco 210-065 Exam two. F. E. Cisco Jabber registers to the Cisco Unified Communications Manager. C.com 21 . The IP default gateway address is incorrect for the endpoint. C. Any Time. B. B. The called user presence status is unknown. Answer: A. Cisco Jabber has no presence capabilities. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communications Manager. "Pass Any Exam.actualtests. The Cisco Unified Communications Manager IM and Presence Service is not available. whereas Cisco Jabber Video for TelePresence registers to the VCS. The E.323 mode? (Choose two. D. The username and password in Cisco Jabber phone services are misconfigured. whereas Cisco Jabber Video for TelePresence has video capabilities. whereas Cisco Jabber registers to the VCS. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager. The URI address has not been configured on the endpoint. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS.

Any Time. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. you will need to use all information presented to you to successfully answer the question.www.Cisco 210-065 Exam E.com 22 ." . Answer: A Explanation: QUESTION NO: 45 In this item.actualtests. "Pass Any Exam. They should not coexist in the same network.

www.com 23 .Cisco 210-065 Exam "Pass Any Exam.actualtests. Any Time." .

E. "Pass Any Exam. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence Video Communication Server. F. D." . The Cisco Telepresence Codec C90 needs to be registered as both SIP and H. URI dialing has not been configured on Cisco Unified Communications Manager. A multipoint control unit is required in order for the call to work. Any Time. which of the these can cause this issue? A.com 24 . H. B.323 is not supported. C.actualtests. Answer: E Explanation: QUESTION NO: 46 Refer to the exhibit.Cisco 210-065 Exam The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the calling search space has been configured correctly.www. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager.323. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager.

E.actualtests. A direct call to 52902511 is being made. C. A Multiway call to multiway221@osl147. Answer: B Explanation: QUESTION NO: 47 Refer to the exhibit. No calls are being attempted by the endpoint. D. B.Cisco 210-065 Exam What can be deduced from the log shown in the exhibit.www. "Pass Any Exam.local is being made." . Any Time. The endpoint is receiving a call from the VCS. A BFCP call is being initiated. which was taken from a Cisco TelePresence Codec C60? A.com 25 .

"Pass Any Exam. Call Control D. must have SFTP enabled on the endpoint F." . must have the security question answer for the endpoint D.D Explanation: QUESTION NO: 49 In this item. Maintenance Answer: A Explanation: QUESTION NO: 48 Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.com 26 .Cisco 210-065 Exam Under which tab can the registration status for the endpoint be found? A.www. you will need to use all information presented to you to successfully answer the question. Any Time. Diagnostics B. must be in the same room as the main display E. must call Cisco TAC for the security code Answer: B. must have FTP enabled on the endpoint B.) A. must have SSH enabled on the endpoint C.actualtests. Configuration C.

com 27 .www.Cisco 210-065 Exam "Pass Any Exam." .actualtests. Any Time.

osl147. Exhibit A B.com 28 .254. utils network host cucm." . ping 172. Exhibit E Answer: C.28.domain254.254. traceroute 172.255 E.28. Which command should be entered to check for network connectivity? A. Exhibit B C. You need to check for connectivity from the Cisco Unified Communications Manager server. What are two valid ways to accomplish this task? (Choose two.28.45 D. utils network traceroute newsystem. Any Time. Exhibit C D.D Explanation: QUESTION NO: 50 You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.local B. An administrator needs to perform a factory reset on a C-Series endpoint.45.) A.Cisco 210-065 Exam Refer to the exhibits.255.254. utils network ping 172.local Answer: B Explanation: QUESTION NO: 51 Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video "Pass Any Exam. Exhibit D E.45 C.28.actualtests.www.

actualtests. you will need to use all information presented to you to successfully answer the question. xcommand SystemUnit FactoryReset Answer: B Explanation: QUESTION NO: 52 In this item.com 29 . "Pass Any Exam. Any Time. utils system factory init C.www. utils factory reset 2 B." . utils reset factory F. xcommand defaultvalues set level: 2 D. xconfiguration default factory E.Cisco 210-065 Exam system to a factory condition? A.

what could be causing the issue? A. Based on the exhibits.255.255.255. when it should be 255.255. "Pass Any Exam.128. C.0.Cisco 210-065 Exam The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Any Time.com 30 .www.actualtests. The codec did not receive a DHCP address from the DHCP server. B. The interface that the codec is in is in the wrong VLAN. D. Answer: A Explanation: The subnet mask configured on the codec is 255. The subnet mask on the codec is incorrect. The ip address of the codec is incorrect." .

" .B. tracing SIP and H. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server Answer: A.F Explanation: QUESTION NO: 54 Refer to the exhibit. provisioning a Cisco TelePresence System endpoint D. Navigator "Pass Any Exam.com 31 .) A. intelligent call routing engine C.www. Which system tab can be used to add video infrastructure devices and endpoints? A.323 calls E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager F. automatic software update and release keys B.actualtests.Cisco 210-065 Exam QUESTION NO: 53 Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three. Any Time.

continuous presence D. room switching E.actualtests.) A.Cisco 210-065 Exam B.www. room switching F. enhanced continuous presence B. Provisioning E." . Configuration Templates D. active continuous presence Answer: D. Any Time. speaker switching Answer: A Explanation: "Pass Any Exam. speaker switching E. continuous presence D. enhanced continuous presence B. System Overview C.com 32 .E Explanation: QUESTION NO: 56 Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple participants at the same time? A. active speaker switching C. Administrative Tools Answer: A Explanation: QUESTION NO: 55 Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch? (Choose two. active speaker C.

actualtests.Cisco 210-065 Exam QUESTION NO: 57 An important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Any Time.www. Which page would be a good place to start for troubleshooting the issue on the affected endpoint? A) B) C) D) "Pass Any Exam.com 33 ." .

"Pass Any Exam. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communications Server B.actualtests. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco TelePresence Management Suite E. Any Time. using the Booking tab in the Cisco TelePresence Management Suite to configure a new conference D.com 34 . using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5 minutes C. Exhibit D Answer: A Explanation: QUESTION NO: 58 Which two of these support an ad-hoc conference call? (Choose two. Exhibit C D. Exhibit B C.www.E Explanation: QUESTION NO: 59 Refer to the exhibit.) A.Cisco 210-065 Exam A. Exhibit A B. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call Answer: A." .

" .www. Any Time. NetworkServices C. Provisioning D. Conference 1 B.Cisco 210-065 Exam Which configuration element can be used to specify the Multiway address that can be used by the endpoint to initiate Multiway calls? A. Video Answer: B Explanation: QUESTION NO: 60 Refer to the exhibit.actualtests.com 35 . SIP Profile 1 E. "Pass Any Exam.

It provides a dialable alias that will trigger a TCS recording workflow. QuickTime B. Any Time. C. MPEG-4 C. Darwin Answer: D Explanation: "Pass Any Exam. D.www. It links recorded media to a specified output location. Configuration C. The GUI cannot be used to view call statistics. B. Answer: B Explanation: QUESTION NO: 62 A network engineer is setting up a Cisco TelePresence Content Server. Flash D. Windows Media E. but does not have a streaming server. Answer: C Explanation: QUESTION NO: 61 Which function does a Cisco TCS recording alias perform? A.com 36 ." . Diagnostics B. Maintenance E.Cisco 210-065 Exam Which tab can be used in order to check the call statistics for the Cisco TelePresence Codec C60? A. It sends media to Cisco Medianet. It provides an alias for the recorded filename.actualtests. The customer requires live streaming. Which media should be configured to stream locally from the TelePresence Content Server? A. Call Control D.

E Explanation: "Pass Any Exam. Digital Media Manager C. G. AAC-LD B.323 > Template D. H.) A. Recording Alias > Template > Media Server Configuration B.com 37 . Show and Share B. Media Experience Engine E.Cisco 210-065 Exam QUESTION NO: 63 Which codec is most suitable for a video streaming solution? A. Recording Alias > Workflow > Template > Media Server Configuration Answer: A Explanation: QUESTION NO: 65 A customer wants to record Cisco TelePresence conferences with the ability to alter the video format and add captions.actualtests. Recording Alias > Media Server Configuration > H.729 C. Recording Alias > Media Server Configuration > Template C. G. TelePresence Content Server Answer: D.www. Any Time." . Which two products are recommended to accomplish this goal? (Choose two.264 D. Interactive Experience Manager D.711 Answer: C Explanation: QUESTION NO: 64 How does a Cisco TCS process incoming video calls? A.

Interactive Experience Client C.com 38 . MPEG-2 and MPEG-4 encoding C. B." .D. Assign a high priority to transactional traffic to maintain quality of business traffic. "Pass Any Exam. Cast E. virtual matrix Answer: A.) A. Media Delivery Engine B.C.D Explanation: QUESTION NO: 67 Which three products are compatible with Digital Media Manager? (Choose three. Which two key QoS elements should be included in the new network design? (Choose two. clustering F. IP and analog cameras B. motion detection E. Any Time.) A.) A. Stadium Vision Director Answer: C.Cisco 210-065 Exam QUESTION NO: 66 Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choose three. Configure bandwidth management features to smooth bursty traffic and mitigate end-to-end congestion. Show and Share D.actualtests.www. Digital Signs F.E Explanation: QUESTION NO: 68 A customer has a data and VoIP converged network and would like to add video to this network. archiving D.

Assign both video and voice traffic to use the highest-priority queue.D Explanation: QUESTION NO: 69 A network engineer wants to quickly view any issues that may exist for a newly deployed Cisco TelePresence SX20 codec." .Cisco 210-065 Exam C.C Explanation: QUESTION NO: 71 "Pass Any Exam. Answer: A. Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic. choose Configuration > System Status > Camera. run xcommand camera. run xconfig. B. choose Configuration> Camera > Status. D. E. D. E. run xstatus.actualtests. From the web GUI. Diagnostics > Alerts B. Configuration > Security Answer: B Explanation: QUESTION NO: 70 An engineer wants to know if there is a way to determine the optical zoom of a Cisco TelePresence SX20 remotely. To which location in the codec web GUI should the engineer navigate to find this information? A.www. Keep video traffic on the low latency queue and move voice traffic to a lower-priority queue. Configuration > System Status D. From the CLI. Which two methods will retrieve this information? (Choose two. From the web GUI. C.com 39 .) A. Diagnostics > Troubleshooting C. From the CLI. Answer: A. Any Time. From CLI.

com 40 . Any Time. Which desktop endpoint supports all of these requirements? A.actualtests.75 B. short rectangle D. long racetrack C. Which table type should be configured when setting up cameras where two participants directly face the endpoint display? A. What type of acoustic paneling does Cisco recommend to provide remediation? A. NRC rating greater than 0.Cisco 210-065 Exam A desktop video endpoint is needed that can support a PrecisionHD camera design and a built-in display." . long rectangle Answer: A Explanation: "Pass Any Exam. NRC rating less than 0.75 D.www. EX90 Answer: D Explanation: QUESTION NO: 72 An immersive video room requires acoustic remediation because there is noticeable reverb present. EX60 C.5 Answer: A Explanation: QUESTION NO: 73 An engineer is configuring a Cisco TelePresence System endpoint for use with a maximum of six people in the room. NRC rating less than 0.5 C. SX80 D. and is Bluetooth-ready and multisite-capable. SX20 B. NRC rating greater than 0. short racetrack B.

C.com 41 .) A. The customer requested a static IP address to be configured on this device." . E. issue the command set static ip-address netmask default-gateway. Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H. Answer: B.323.E Explanation: QUESTION NO: 75 On a Cisco C-Series codec. issue the command xconfigure interface:1 static ip-address netmask.Cisco 210-065 Exam QUESTION NO: 74 Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two. D. Use the CLI command Conference Default Protocol: H323.323 > Settings > Default Call Protocol > H.323. B. From the MCU console. From the MCU console. where would a technician go to configure the wallpaper? A. issue the command static A ip-address netmask default-gateway. Which two methods address this request? (Choose two.www. use the Network > Port A menu options. Any Time. Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323.actualtests. Use the GUI and set System > H. Use the CLI command Default Protocol: H323. "Pass Any Exam. From the web interface. Configuration > System Configuration Answer: B Explanation: QUESTION NO: 76 A new Cisco TelePresence MCU 5300 is being installed. Configuration > User Administration B. C. Configuration > Peripherals D. B.) A. From the MCU console. Configuration > Personalization C. D.

Prominent B.com 42 . Which control device and function is used to control the far-end camera? A. camera port D. Any Time. Which layout option should the user choose? A. Answer: C. PiP D. From the web interface." .actualtests. use the Settings > Interface menu options. Navigate using the TRC5 Remote Control arrow keys. auxiliary network port Answer: D Explanation: QUESTION NO: 78 A user is currently on a Cisco TelePresence call using a Touch 8 device and would like to change the local screen layout so that the active speaker is in full screen and the other participants are smaller within the picture. FullScreen Answer: B Explanation: QUESTION NO: 79 The user of a Cisco TelePresence MX300 wants to control the far-end camera of any video conference participant. Overlay C. IP phone port B.www. "Pass Any Exam.D Explanation: QUESTION NO: 77 To which Ethernet port on a Cisco TelePresence System (500/1x00/1300/3xx0) endpoint would a technician need to connect to manually assign a static IP address for first-time setup? A. network port C.Cisco 210-065 Exam E.

" . TS 8710 C. Tap on the image of one of the participants using touch control. Use the Touch Control Conference functions.Cisco 210-065 Exam B. CTMS B. multiway feature to allow on-demand conferences D. Answer: B Explanation: QUESTION NO: 80 Refer to the exhibit. multipoint scheduled conferences using conference factory C. D. Which feature is the video administrator attempting to configure in this exhibit? A. Any Time.actualtests. C. MCU 5300 "Pass Any Exam.com 43 .www. multisite feature to allow scheduled conferences Answer: C Explanation: QUESTION NO: 81 Which MCU supports the use of a lobby screen? A. A company would like to add additional multipoint features to their video infrastructure. multisite feature to allow third-party multipoint conferences B. Use the TRC5 Remote Control home key.

The Cisco VCS uses local authentication and a single username for all endpoints. VCS > Configuration > Authentication > Devices > Local Database B. "Pass Any Exam.www.Cisco 210-065 Exam D. Endpoint > Configuration > System Configuration > SIP > Profile 1 > Authentication 1 E. VCS > Configuration > Registration > Allow List F. Any Time.com 44 . An administrator is attempting to register a Cisco TelePresence endpoint to a Cisco VCS.actualtests. Where is the first place that the administrator should go to resolve the issue? A. VCS > Configuration > Registration > Deny List Answer: D Explanation: QUESTION NO: 83 Refer to the exhibit. VCS > Configuration > Authentication > Outbound Connection Credentials D. Endpoint > Configuration > System Configuration > Profile 1 > Authentication C." . Conductor Answer: B Explanation: QUESTION NO: 82 Refer to the exhibit.

E. The endpoint does not have the proper port assignments configured for SIP signaling. which is where the lab. Syslog Answer: B "Pass Any Exam. Management would like to find out when a particular multipoint control unit feature was enabled and who enabled it. The lab. B. Any Time.com 45 . D. C.local SIP domain is not configured in the Cisco VCS allow list for registration.local SIP domain is learned. The Cisco VCS failed to bind to the LDAP server. Which menu option is the most appropriate when searching for that information? A." . The endpoint uses the TCP protocol and the Cisco VCS is configured to allow only TLS for SIP registrations.www.actualtests. What is the most likely cause of this failure? A. Event Log D. Event Display Filter B.Cisco 210-065 Exam A network engineer is attempting to register a Cisco TelePresence endpoint to a Cisco VCS. Answer: C Explanation: QUESTION NO: 84 Refer to the exhibit. The lab.local SIP domain does not exist on the Cisco VCS. Audit Log C.

What does this red "X" indicate? A.134.actualtests. INFO admin CLI login from 10. INFO Packet loss detected: 100% loss .160. The endpoint failed to load its firmware. INFO Jitter buffers increased C. Which log entry explains the reason for the call failure? A. D. INFO Main Video stream packet loss detected on the center codec Answer: A Explanation: QUESTION NO: 86 A Cisco TelePresence System 1300 Series endpoint is in the process of booting and the engineer notices a red "X" on the screen for Step 6 in the boot process.15:51151 D.no media stream received in the last 10 seconds B. C. An employee is reviewing the logs from a Cisco TelePresence System unit due to reports of calls being dropped. The touch panel is malfunctioning.Cisco 210-065 Exam Explanation: QUESTION NO: 85 Refer to the exhibit. B. The endpoint could not obtain an IP address via DHCP. There is an error with compact flash. Answer: B Explanation: "Pass Any Exam.www." .com 46 . Any Time.

D. B. Which action could help mitigate this issue? A. The customer recently connected a new TV monitor to the Cisco TelePresence endpoint. Turn off any postprocessing settings. Answer: A Explanation: "Pass Any Exam. Any Time. Verify that Outbound Connection Credentials are properly configured.actualtests." . This device is now showing a warning concerning the echo cancellation delay.com 47 . Check to see that SIP Mode is set to On.www. Turn on Frequency Scan Acceleration for the new TV. Answer: A Explanation: QUESTION NO: 88 Refer to the exhibit. C. C. B. Ensure that CallSetup Mode is set to Gatekeeper. Verify that the correct SIP authentication credentials have been configured. What is the first thing that should be checked in the endpoint configuration settings? A. The SIP status shows "Failed: 403 Forbidden" in the endpoint's web interface. Turn off surround sound on the new TV. D.Cisco 210-065 Exam QUESTION NO: 87 A Cisco TelePresence EX Series desktop endpoint failed to register to a Cisco VCS. Turn off 3D mode on the new TV.

actualtests. an encryption password will be needed. B. Answer: A Explanation: QUESTION NO: 91 The command xCommand Security FIPSMode Activate is issued to a Cisco TelePresence CSeries codec. F.) A. Answer: A. E. log in as the administrator. Via the CLI. "Pass Any Exam. Via the web GUI. From the touch screen. A restart is required to complete the system restore process. C." . choose Backup and Restore. Hold down the reset button on the back of the appliance for 10 seconds. C. Which two methods could be used for this purpose? (Choose two. log in as root and issue the factory-reset command. A function SFTP server is needed for remote restore. If the backup file is encrypted. D. Management wants to reverse the effects of this command. Any Time. Cisco TMSXE can be used to process and restore backups. Via the CLI.com 48 . log in as root and issue the reset-defaults command. perform a factory reset from the Administrator Settings menu.C Explanation: QUESTION NO: 90 How would an administrator reset a Cisco VCS Control appliance to the default configuration? A. D. A flash drive that is connected to the appliance can be used to restore the configuration.) A.www.B. The VCS expressway must be put into maintenance mode during the upgrade. B. Hold down the power button for 10 seconds until the light flashes. A valid backup configuration file must be accessible. B. G.Cisco 210-065 Exam QUESTION NO: 89 Which three items should be considered when restoring a backup to a Cisco VCS Expressway? (Choose three. disable FIPS mode in the Administrator Settings menu. E. From the touch screen. and click the Factory Reset button.

disable all security settings from the Administrator Settings menu.actualtests. xcommand Answer: C Explanation: QUESTION NO: 93 A network engineer wants to perform a factory reset on a Cisco TelePresence MX device from the CLI. xConfiguration SystemUnit FactoryReset Answer: C Explanation: "Pass Any Exam. Which command should the technician enter? A. From the touch screen. F. Which command should be used? A. Any Time. E. Use SSH to connect to the system and enter the xCommand Security FIPSMode Deactivate command.Cisco 210-065 Exam C.com 49 . xCommand SystemUnit FactoryReset D." . xfeedback D.www. Answer: B. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command. xhistory E. xConfiguration FactoryReset B. D. Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset Init command. xCommand FactoryReset C. xconfiguration C. xstatus B.F Explanation: QUESTION NO: 92 A technician is trying to troubleshoot real-time call information from the CLI of a VCS.

C.www.Cisco 210-065 Exam QUESTION NO: 94 Refer to the exhibit.actualtests. B." . Any Time. "Pass Any Exam. The originating caller was not authenticated. A local call policy rule denied the call. The source alias matched an entry in the registration deny list. What was the cause for the call setup failure? A.com 50 . A technician is reviewing the search history details on a Cisco TelePresence VCS for a recent call that failed.

Answer: A Explanation: QUESTION NO: 95 Refer to the exhibit. Which transform will the destination alias match? A. ability to change the local layout to prominent mode B. A call with a destination alias of 15551001234 reaches a Cisco TelePresence VCS. Transform 4 Answer: B Explanation: QUESTION NO: 96 A customer wants to know the options that are available when using all Cisco TelePresence SX Series endpoints in a multisite conference that is hosted locally. Any Time. ability to change the layout of remote participants to prominent mode C.www.Cisco 210-065 Exam D. ability to change the layout of remote participants to multisite mode "Pass Any Exam. Transform 3 D." .) A. Transform 1 B. What are three capabilities of the Cisco TelePresence SX20 endpoint during a native multisite call? (Choose three.com 51 .actualtests. ability to change the contact status of remote participants F. ability to control the camera of remote participants E. The source alias origin is unknown. ability to change the Self-View status of remote participants D. Transform 2 C.

Layouts cannot be customized on the MCU 5300.www. Configure a custom layout for each user individually. equal E. Answer: C Explanation: QUESTION NO: 98 An end user using C series codec wants to change the participant layout for a meeting hosted on a Cisco TelePresence Server. single screen B.com 52 .) "Pass Any Exam." .D. custom F. What are three valid layout options available in codec web interface? (Choose three. Configure a custom layout and apply the layout to all new participants. C. rolling D. D.actualtests. There is a requirement for participants to start with the same layout when joining the conference. overlay Answer: A.Cisco 210-065 Exam Answer: A. B.D Explanation: QUESTION NO: 97 A network administrator is asked to configure a video conference using the Cisco TelePresence MCU 5300. loudest speaker C. Allow each endpoint to configure its own layout. What are three characteristics the engineer must keep in mind? (Choose three.F Explanation: QUESTION NO: 99 An engineer is configuring VIP mode for a Cisco TelePresence Multipoint Switch. How can this goal be accomplished? A.) A.B. Any Time.

Cascading is supported for multipoint control units that are registered to Cisco Unified Communications Manager.) A. D. Any Time. It is possible to manually create a cascaded conference via the Cisco TelePresence MCU Management API.com 53 .www. B. The VIP is displayed on the center screen for three screen systems. B.D. C. D. Answer: A. F. E. Cascading is supported for the Cisco TelePresence Server in remotely managed mode. Conductor automatically performs cascading.actualtests. Network multipoint meetings are supported. Locking is not supported." . VIP mode can be configured only when the meeting is not active.D Explanation: "Pass Any Exam. What are three capabilities when cascading? (Choose three.F Explanation: QUESTION NO: 100 An engineer needs to configure cascading to support additional video conference attendees.C.Cisco 210-065 Exam A. C. Only one VIP can be configured for each meeting. F. Answer: B. VIP mode timers must be configured from the CLI. All cascaded multipoint control units must be in the same location. E. A maximum of four multipoint control units are supported.

Sign up to vote on this title
UsefulNot useful

Master Your Semester with Scribd & The New York Times

Special offer for students: Only $4.99/month.

Master Your Semester with a Special Offer from Scribd & The New York Times

Cancel anytime.