Vendor: Cisco

Exam Code: 300-075
Exam Name: Implementing Cisco IP Telephony & Video,
Part 2 v1.0
Version: 16.081

QUESTION 1
Which statement is true regarding the configuration of SAF Forwarder?
A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
B. The client label that is configured in Cisco Unified Communications Manager must match the
configuration on the SAF Forwarder router.
C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as
SAF clients.
D. The destination IP address must match the loopback address of the SAF router.
Answer: A

QUESTION 2
Which three devices support the SAF Call Control Discovery protocol? (Choose three.)
A.
B.
C.
D.
E.
F.

Cisco Unified Border Element
Cisco Unity Connection
Cisco IOS Gatekeeper
Cisco Catalyst Switch
Cisco IOS Gateway
Cisco Unified Communications Manager

Answer: AEF

QUESTION 3
Which component of Cisco Unified Communications Manager is responsible for sending
keepalive messages to the Service Advertisement Framework forwarder?
A.
B.
C.
D.
E.
F.

Call Control Discovery requesting service
Hosted DNs service
Service Advertisement Framework client control
Cisco Unified Communications Manager database
Service Advertisement Framework-enabled trunk
gatekeeper

Answer: C

QUESTION 4
What is an advantage of TEHO?
A.
B.
C.
D.

TEHO implemented with ISRs eliminates PSTN toll charges.
TEHO implemented with ISRs can reduce PSTN toll charges.
TEHO implemented with AAR reduces toll charges.
TEHO implemented with CFUR reroutes calls.

Answer: B

QUESTION 5
Which two options are valid service parameter settings that are used to set up proper video QoS

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

2

behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.)
A.
B.
C.
D.
E.

DSCP for Video Calls when RSVP Fails
Default Intraregion Min Video Call Bit Rate (Includes Audio)
Default Interregion Max Video Call Bit Rate (Includes Audio)
DSCP for Video Signaling
DSCP for Video Signaling when RSVP Fails

Answer: AC

QUESTION 6
Which sign is prefixed to the number in global call routing?
A.
B.
C.
D.
E.
F.

+
#
@
&
*

Answer: B

QUESTION 7
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the
Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and
TMS control the Cisco Telepresence Conductor, the Cisco TelePresence MCU, and the Cisco
Jabber TelePresence for Windows
DNS Server:

Device Pool:

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

3

com 4 .exam. http://www.Expressway: ILS: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

Locations: MRA: Speed Dial: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 5 . http://www.exam.

exam.com 6 . http://www.SIP TRUNK: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

) A. E. The Cisco UCM is controlling the Cisco Jabber for Windows Client. Answer: BE QUESTION 8 Scenario: There are two call control systems in this item. and the Cisco Jabber TelePresence for Windows DP: Locations: Get Latest & Actual 300-075 Exam's Question and Answers from exam. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS. Media Resource Group List. the Cisco TelePresence MCU.exam.What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two. The Cisco VCS is controlling the SX20.com 7 . Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM. and the 7965 and 9971 Video IP Phone. B. C. D. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS. http://www.

CSS: Movie Failure: Movie Setting: Topology: Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam. http://www.com 8 .

Subzones: Links: Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam. http://www.com 9 .

B. The bandwith is incorrectly configured. Answer: D QUESTION 9 Which two options for a Device Mobility-enabled IP phone are true? (Choose two. C. some calls Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. B.com 10 .exam. the Device Mobility-related settings are also applied. which of the following reasons could be causing this failure? A. If the DMGs are the same. the roaming) device pool are applied. http://www. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool. D. D. After reviewing the exhibits.Pipe: Both of the Cisco Telepresence Video for Windows clients are able to log into the server but can't make any calls. Answer: BD QUESTION 10 The network administrator of Enterprise X receives reports that at peak hours.) A. Wrong username and/or password. The roaming-sensitive parameters of the current (that is. The phone configuration is not modified. The TMSPE is not working. Wrong SIP domain name.

Which two RTMT counters can give more information on this? (Choose two.) A. E. SX20 System information: DX650 Configuration: Get Latest & Actual 300-075 Exam's Question and Answers from exam. D. B. The network administrator wants to estimate the volume of calls being affected by this issue. CallsRingNoAnswer OutOfResources LocationOutOfResources RequestsThrottled CallsAttempted Answer: BC QUESTION 11 Scenario: There are two call control systems in this item. C. The Cisco UCM is controlling the DX650. and the Cisco Jabber Telepresence for Windows. and the 9971 Video IP Phone. Investigation shows no connectivity problems. http://www. the Cisco Jabber for Windows Client.exam.com 11 . The Cisco VCS is controlling the SX20.between remote offices are not passing through. the Cisco Telepresence MCU.

http://www.com 12 .MRGL: DP: Locations: Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam.

com 13 .exam. http://www.AARG: CSS: Movi Failure: Movie Settings: What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two) Get Latest & Actual 300-075 Exam's Question and Answers from exam.

SAF Forwarder. F.323 trunk is added by selecting H. The H. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. SAF Security Profile.323 trunk is added for Call Control Discovery. The destination IP address field is configured as `SAF' to indicate that this trunk is used for SAF.exam. CSF Device is not registered.323 trunk is added by selecting Call Control Discovery Trunk and then selecting H.com 14 . which statement is true? A. SAF Security Profile. and CCD Advertising Service B. User is not associated with the device. and SAF Forwarder E. and CCD Advertising Service Answer: B QUESTION 13 When a SIP trunk is added for Call Control Discovery. which statement is true? A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The destination IP address field is configured as `SAF' to indicate that this trunk is used for SAF.323 as the protocol to be used. D. Answer: B QUESTION 14 When an H. C. Which minimum configurations on Cisco Unified Communications Manager are needed for the SAF registration to take place? A. CCD Requesting Service.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The H. SAF Security Profile. SAF Forwarder. C. SAF Trunk. The Enable SAF check box should be selected. SAF Trunk. SAF Security Profile. IP or DNS name resolution issue. B. E. Answer: BD QUESTION 12 Assume that the Cisco IOS SAF Forwarder is configured correctly. The H. SAF Trunk. SAF Trunk. and CCD Requesting Service C. IP Phone DN not associated with the user. CCD Requesting Service. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the protocol to be used. The Trunk Service Type should be Call Control Discovery.323 Trunk. C.A. SAF Trunk. SAF Forwarder. B. and selecting Inter-Cluster Trunk as the Device Protocol. D. Wrong SIP domain configured. B. http://www. Incorrect username and password. and CCD Advertising Service D. Get Latest & Actual 300-075 Exam's Question and Answers from exam. The Trunk Service Type should be Call Control Discovery. D. The Enable SAF check box should be selected in the trunk configuration. The SIP trunk is added by selecting SIP Trunk and SIP Protocol.

http://www. C. B. D. Cisco Unified Border Element Cisco Unity Connection Cisco IOS Gatekeeper Cisco Catalyst Switch Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. SAF requires that the EIGRP be configured only on SAF routers. show eigrp service-family ipv4 clients show eigrp address-family ipv4 clients show voice saf dndb all show saf registration show ip saf registration Answer: A QUESTION 17 Which statement about Service Advertisement Framework is true? A. Static routes are not supported. D. D. Non-SAF routers act as an IP cloud.com 15 . E.exam. SAF requires that the EIGRP be configured on all routers. SAF has no dependency on the underlying routing protocol. C. B. B.) A. E.Answer: A QUESTION 15 Which Cisco IOS command is used to verify that a SAF Forwarder that is registered with Cisco Unified Communications Manager has established neighbor relations with an adjacent SAF Forwarder? A. D. Answer: D QUESTION 18 Which three devices support the SAF Call Control Discovery protocol? (Choose three. C. show eigrp service-family ipv4 neighbors show eigrp address-family ipv4 neighbors show voice saf dndball show saf neighbors show ip saf neighbors Answer: A QUESTION 16 Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder? A. C. including non-SAF routers. SAF operates on any dynamic or static IP routing configuration. as long as it is a dynamic routing protocol. SAF is totally independent of the underlying routing protocol.

http://www.com 16 . and the Cisco Jabber Telepresence for Windows.E. Cisco IOS Gateway F. E. B.323 call from a RAS-enabled endpoint that originates from an external zone? A. ARQ SETUP LRQ INVITE OPTIONS Answer: C QUESTION 20 Scenario: There are two call control systems in this item. SX20 System information: DX650 Configuration: Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam. D. the Cisco Jabber for Windows Client. the Cisco Telepresence MCU. and the 9971 Video IP Phone. C. Cisco Unified Communications Manager Answer: AEF QUESTION 19 Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H. The Cisco VCS is controlling the SX20. The Cisco UCM is controlling the DX650.

MRGL: DP: Locations: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 17 . http://www.exam.

18-32.AARG: CSS: Movi Failure: Movie Settings: A new DX650 IP phone with MAC address D0C7.exam. http://www. IP address is 172.8914. but is not registering properly. What is causing this failure? Get Latest & Actual 300-075 Exam's Question and Answers from exam.132D.com 18 .119 has been added to the Cisco Unified Communications Manager.

A.
B.
C.
D.
E.

Device Pool cannot be default.
The DX650 is the incorrect calling search space.
The DX650 Phones does not support SIP.
The location Hub_None has not been activated.
The DX650's MAC address is incorrect in the Cisco UCM.

Answer: E

QUESTION 21
Which two statements regarding you configuring a traversal server and traversal client
relationship are true? (Choose two.)
A.
B.
C.
D.

VCS supports only the H.460.18/19 protocol for H.323 traversal calls.
VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls.
VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls.
If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client
to the traversal server for SIP signaling.
E. A VCS Expressway located in the public network or DMZ acts as the firewall traversal client.
Answer: BD

QUESTION 22
Which statement about the function of the "+" symbol in the E.164 format is true?
A.
B.
C.
D.

The "+" symbol represents the international country code.
The "+" symbol represents the international call prefix.
The "+" symbol matches the preceding element one or more times.
The "+" symbol matches the preceding element zero or one time.

Answer: B

QUESTION 23
You need to verify if the Media Gateway Control Protocol gateway is enabled and active.
Which command should you use for this purpose?
A.
B.
C.
D.
E.
F.

show running-config
show fallback-mgcp
show gateway
show ccm-manager fallback-mgcp
show running-config gateway
show fallback-mgcp ccm-manager

Answer: D

QUESTION 24
Which task must you perform before deleting a transcoder?
A. Delete the dependency records.

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

19

B.
C.
D.
E.
F.

Unassign it from a media resource group.
Use the Reset option.
Remove the device pool.
Remove the subunit.
Delete the common device configuration.

Answer: B

QUESTION 25
In a node-specific Service Advertisement Framework forwarder deployment model, what is the
maximum number of Service Advertisement Framework forwarders that you can assign to a
specific node?
A.
B.
C.
D.
E.
F.

1
2
3
4
5
6

Answer: B

QUESTION 26
Which two actions ensure that the call load from Cisco TelePresence Video Communication
Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes?
(Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer
addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each
Unified CM node.
Answer: AD

QUESTION 27
Where do you specify the device mobility group and physical location after they have been
configured?
A.
B.
C.
D.
E.
F.

phones
DMI
device mobility CSS
device pool
MRGL
locale

Answer: D
Explanation:

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

20

Before you configure a device pool, you must configure the following items if you want to choose
them for the device pool, Cisco Unified Communications Manager group (required), Date/time
group (required). Region (required) , SRST reference (optional). Media resource group list
(optional), Calling search space for auto-registration (optional). Reverted call focus priority
(optional), Device mobility group (optional), Device mobility calling search space, Physical
location (optional). Location, AAR group. AAR calling search space.

QUESTION 28
Which three commands are necessary to override the default CoS to DSCP mapping on interface
Fastethernet0/1? (Choose three.)
A.
B.
C.
D.

mls qos map cos-dscp 0 10 18 26 34 46 48 56
mls qos map dscp-cos 8 10 to 2
mls qos
interface Fastethernet0/1
mls qos trust cos
E. interface Fastethernet0/1
mls qos cos 1
F. interface Fastethernet0/2
mls qos cos 1
Answer: ACD

QUESTION 29
If delegated credentials checking has been enabled and remote workers can register to the VCS
Expressway, which statement is true?
A. H.323 message credential checks are delegated.
B. SIP registration proxy mode is set to On in the VCS Expressway.
C. A secure neighbor zone has been configured between the VCS Expressway and the VCS
Control.
D. SIP registration proxy mode is set to Off in the VCS Expressway.
Answer: D

QUESTION 30
A local gateway is registered to Cisco TelePresence Video Communication Server with a prefix of
7. The administrator wants to stop calls from outside the organization being routed through it.
Which CPL configuration accomplishes this goal?

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

21

exam. C.A. B. http://www.com 22 . Get Latest & Actual 300-075 Exam's Question and Answers from exam.

http://www. and the Cisco Jabber Telepresence for Windows.exam. SX20 System information: Get Latest & Actual 300-075 Exam's Question and Answers from exam. The Cisco VCS is controlling the SX20.com 23 . the Cisco Jabber for Windows Client. and the 9971 Video IP Phone. the Cisco Telepresence MCU.D. Answer: A QUESTION 31 Scenario: There are two call control systems in this item. E. The Cisco UCM is controlling the DX650.

http://www.DX650 Configuration: MRGL: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 24 .exam.

exam.DP: Locations: AARG: CSS: Movi Failure: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 25 . http://www.

323 registrations.Movie Settings: Which device configuration option will allow an administrator to assign a device to a specific rights for making calls to specific DNs? A. http://www.323 endpoints that register with an H.com's Cisco TelePresence Video Communication Server allows SIP and H.164 number only? A.exam. E. C.com 26 . Get Latest & Actual 300-075 Exam's Question and Answers from exam. Media Resource Group List Device Pool Location AAR Group Calling Search Space Answer: E QUESTION 32 Widgets. B. Which local zone search rule configuration allows SIP registered endpoints to connect to H.323 E. D.

Answer: D QUESTION 33 Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled? A. Expressway-E internal IP address Expressway-E external IP address Expressway-E internal FQDN Expressway-E external FQDN Answer: D QUESTION 34 Scenario: There are two call control systems in this item. The Cisco VCS is controlling the SX20. the Cisco TelePresence MCU.exam.B. http://www. C. D. and the Cisco Jabber TelePresence for Windows Get Latest & Actual 300-075 Exam's Question and Answers from exam. D. and the 7965 and 9971 Video IP Phone. B. The Cisco UCM is controlling the Cisco Jabber for Windows Client.com 27 . C.

DP: Locations: CSS: Movie Failure: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 28 .exam. http://www.

com 29 .Movie Setting: Topology: Subzones: Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.exam.

Links: Pipe: What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two) A. User is not associated with the device. C.com 30 . B. Get Latest & Actual 300-075 Exam's Question and Answers from exam. Incorrect username and password. http://www.exam. Wrong SIP domain configured.

Answer: BD QUESTION 35 Scenario: There are two call control systems in this item. IP Phone DN not associated with the user. CSF Device is not registered. and the 7965 and 9971 Video IP Phone. E. IP or DNS name resolution issue.exam. http://www.D.com 31 . and the Cisco Jabber TelePresence for Windows DP: Locations: CSS: Movie Failure: Get Latest & Actual 300-075 Exam's Question and Answers from exam. The Cisco VCS is controlling the SX20. F. The Cisco UCM is controlling the Cisco Jabber for Windows Client. the Cisco TelePresence MCU.

com 32 . http://www.Movie Setting: Topology: Subzones: Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam.

Device Pool. Location. C. After reviewing the exhibits. Not enough bandwidth has been allocated.exam.Links: Pipe: A third collaboration call fails between the backbone site and the HQ site. http://www. B. which of the following reasons could be causing this failure? A.com 33 . Get Latest & Actual 300-075 Exam's Question and Answers from exam.

The pipe is not functioning. the Cisco Jabber for Windows Client. Answer: A QUESTION 36 Scenario: There are two call control systems in this item. http://www. The Cisco VCS and TMS control the Cisco Telepresence Conductor.D. and the Cisco Jabber TelePresence for Windows DNS Server: Device Pool: Expressway: Get Latest & Actual 300-075 Exam's Question and Answers from exam. and the 7965 and 9971 Video IP Phones.com 34 . The Cisco UCM is controlling the DX650.exam. the Cisco TelePresence MCU.

ILS: Locations: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 35 .exam. http://www.

MRA: Speed Dial: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 36 .exam. http://www.

http://www.com 37 .exam.SIP TRUNK: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

) A. D. B. http://www. IP or DNS name resolution issue. E.com 38 .lab exist. allowing numeric dialing from Cisco phones to Expressway B. B. configuring a device pool with video feature enabled C. Wrong SIP domain configured. Accept Unsolicited Notification Enable Application Level Authorization Accept Out-of-Dialog REFER Accept Replaces Header Accept Presence Subscription Answer: AD QUESTION 38 Which two options are configuration steps on Cisco Unified Communications Manager that are used when integrating with VCS Expressway servers? (Choose two. No SIP route patterns for cisco. D. C. allowing dialing to Expressway domain from Cisco phones Get Latest & Actual 300-075 Exam's Question and Answers from exam.The intercluster URI call routing no longer allows calls between sites.) A.exam. What is the reason why this would happen? A. C. User is not associated with the device. Answer: C QUESTION 37 Which two options should be selected in the SIP trunk security profile that affect the SIP trunk pointing to the VCS? (Choose two.

B. C. Which action routes the 11th call through the PSTN? A. B. Configure a route pattern. Configure CFUR in Cisco Unified Communications Manager. Configure AAR in Cisco Unified Communications Manager.com 39 . SRST with MGCP fallback SRST without MGCP fallback Cisco Unified Communications Manager Express in SRST mode SRST with VoIP dial peers to Cisco Unified Communications Manager Express Answer: C Get Latest & Actual 300-075 Exam's Question and Answers from exam. D.exam. D. B. Configure Cisco Unified Communications Manager locations. minimize PSTN costs help in the selection of the PSTN egress gateway eliminate the need for a route list allow manipulation of digits at the cost point to egress Answer: B QUESTION 40 Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC? A. C. B. adding the Expressway servers to the Application Servers list Answer: AC QUESTION 39 What is the purpose of the local route group? A. Answer: C QUESTION 41 Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls. D. C. http://www. Configure Cisco Unified Communications Manager RSVP-enabled locations. creating an application user on Cisco Unified Communications Manager with assigned privileges E. Configure an SIP trunk to the ISR. Answer: B QUESTION 42 Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure? A. Configure Cisco Unified Communications Manager AAR. and route groups to a trunk and a gateway in Cisco Unified Communications Manager. C. Configure a route pattern to a gateway in Cisco Unified Communications Manager. D.D. a route list.

Protocols. Allow List. and set Auto Registration to off. http://www. navigate to Configuration. B. B. All MGCP call processing is interrupted until the Cisco Unified Communications Manager servers are online. F. C. Registration. C. ccm-manager secondary dialtone 0 Answer: B QUESTION 44 Which action is performed by the Media Gateway Control Protocol gateway with SRST configured. when it loses connectivity with the primary and backup Cisco Unified Communications Manager servers? A.323. Protocols.323. navigate to Configuration. and set Auto Registration to off. voice service voip secondary dialtone 0 B. navigate to Configuration. dial-peer voice 1 pots secondary dialtone 0 D. On the VCS. E.exam.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically? A. H. D. call-manager-fallback secondary dialtone 0 C. E.) A. The gateway waits for the primary Cisco Unified Communications Manager server to come alive. call-manager-fallback max-ephones keepalive limit-dn ip source-address Answer: ABE QUESTION 46 Which parameter should be set to prevent H. The MGCP calls are queued up until the Cisco Unified Communications Manager servers are online. On the VCS. The gateway falls back to the H. On the VCS. and set Auto Discover to off. D. C.com 40 . B. The gateway continues to make an attempt to connect to the backup Cisco Unified Communications Manager server.QUESTION 43 Which option configures the secondary dial tone option for SRST mode to let the users hear the dial tone for PSTN calls? A. Answer: B QUESTION 45 Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.323 protocol for further call processing. The gateway continues with the MGCP call processing without any interruption. Get Latest & Actual 300-075 Exam's Question and Answers from exam. H.

) A. The traversal client zone on Expressway-C Media encryption mode must be set to Auto. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.exam. The Cisco VCS and TMS controll the the Cisco TelePresence MCU. D. B. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On. navigate to Configuration. and the Cisco Jabber TelePresence for Windows DP: Locations: Get Latest & Actual 300-075 Exam's Question and Answers from exam. The Cisco UCM is controlling the DX650. http://www. E. the Cisco Jabber for Windows Client.D. Answer: BE QUESTION 48 Scenario: There are two call control systems in this item. Configuration. C. On the VCS. and the 9971 Video IP Phone.com 41 . Registration. The traversal server zone on Expressway-C must have a TLS verify subject name configured. Answer: A QUESTION 47 Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two. and set Auto Registration to off. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.

com 42 .exam. http://www.CSS: SRST: SRST-BR2-Config: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

exam. http://www.com 43 .BR2 Config: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

http://www.com 44 .SESTPSTNCall: Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam.

Configure transcoding within Cisco Unified Communications Manager. D. Answer: C QUESTION 50 Scenario: There are two call control systems in this item. C. Media Resource Group List Device Pool Location AAR Group Regions Answer: C QUESTION 49 A voicemail product that supports only the G. C.729 codec over the WAN link to headquarters? A. and the Cisco Jabber TelePresence for Windows DP: Locations: Get Latest & Actual 300-075 Exam's Question and Answers from exam.711 codec is installed in headquarters. the Cisco Jabber for Windows Client. B. Which action allows branch Cisco IP phones to function with voicemail while using only the G. B. Configure transcoder resources in the branch Cisco IP phones. http://www. D. The Cisco VCS and TMS controll the the Cisco TelePresence MCU. E.Which device configuration option will allow an administrator to control bandwidth between calls placed between branches? A. and the 9971 Video IP Phone. Configure Cisco Unified Communications Manager regions.com 45 . The Cisco UCM is controlling the DX650.exam. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones.

CSS: SRST: Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.com 46 .exam.

exam.SRST-BR2-Config: BR2 Config: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 47 . http://www.

exam.com 48 . http://www.SESTPSTNCall: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of
the following reasons could be causing this failure?
A.
B.
C.
D.

Device Pool cannot be default.
The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
The router does not support SRST.
The SRST enabled router is not configured correctly.

Answer: A

QUESTION 51
Which option is a benefit of implementing CFUR?
A.
B.
C.
D.

CFUR is designed to initiate TEHO to reduce toll charges.
CFUR can prevent phones from unregistering.
CFUR can reroute calls placed to a temporarily unregistered destination phone.
CFUR eliminates the need for COR on an ISR.

Answer: C

QUESTION 52
What is the standard Layer 3 DSCP media packet value that should be set for Cisco
TelePresence endpoints?
A.
B.
C.
D.

CS3 (24)
EF (46)
AF41 (34)
CS4 (32)

Answer: D

QUESTION 53
You want to perform Media Gateway Control Protocol gateway maintenance. For this purpose,
you disable Media Control Gateway Protocol gateway using the no mgcp command. After you
perform the maintenance, you want to enable the Media Control Gateway Protocol gateway.
Which command should you use?
A.
B.
C.
D.
E.
F.

enable mgcp
mgcp
mgcp enable
mgcp yes
activate mgcp
mgcp active

Answer: B

QUESTION 54
Which gateway does the Cisco Unified Communications Manager control all call activity?

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

49

A.
B.
C.
D.

SIP
MGCP
H.323
Media

Answer: B

QUESTION 55
Which action configures phones in site A to use G.711 to site B, but uses G.729 to site C?
A.
B.
C.
D.

Configure Cisco Unified Communications Manager regions.
Configure Cisco Unified Communications Manager locations.
Configure transcoder resources in Cisco Unified Communications Manager.
Configure a gatekeeper.

Answer: A

QUESTION 56
Refer to the exhibit. Which statement is true?

A. Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.
B. If the VCS receives a call to an unknown IP address, it queries its neighbors for the remote
address and if permitted, it routes the call through the neighbor.
C. Endpoints that are registered directly to the VCS can call only an IP address of a system that is
also registered directly to that VCS.
D. Dialing by IP address is not supported on VCS.
Answer: A

QUESTION 57
You want to avoid unnecessary interworking in Cisco TelePresence Video Communication
Server, such as where a call between two H.323 endpoints is made over SIP, or vice versa.
Which setting is recommended?
A.
B.
C.
D.
E.

H.323 - SIP interworking modE. Reject
H.323 - SIP interworking modE. On
H.323 - SIP interworking modE. Registered only
H.323 - SIP interworking modE. Off
H.323 - SIP interworking modE. Variable

Answer: C

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

50

QUESTION 58
Which commands are needed to configure Cisco Unified Communications Manager Express in
SRST mode?
A.
B.
C.
D.

telephony-service and srst mode
telephony-service and moh
call-manager-fallback and srst mode
call-manager-fallback and voice-translation

Answer: A

QUESTION 59
Which component is needed to set up SAF CCD?
A.
B.
C.
D.

SAF-enabled H.323 intercluster (gatekeeper controlled) trunk
SAF forwarders on Cisco routers
Cisco Unified Communications cluster
SAF-enabled H.225 trunk

Answer: B

QUESTION 60
Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST
failover?
A.
B.
C.
D.
E.

ccm-manager fallback-mgcp
telephony-service
dialplan-pattern
isdn overlap-receiving
voice-translation-rule

Answer: A

QUESTION 61
When you configure QoS on VCS, which settings do you apply if traffic through the VCS should
be tagged with DSCP AF41?
A.
B.
C.
D.
E.

Set QoS mode to DiffServ and tag value 32.
Set QoS mode to IntServ and tag value to 34.
Set QoS mode to DiffServ and tag value 34.
Set QoS mode to IntServ and tag value to 32.
Set QoS mode to ToS and tag value to 32.

Answer: C

QUESTION 62
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the
Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

51

TMS control the Cisco Telepresence Conductor. the Cisco TelePresence MCU.exam. http://www. and the Cisco Jabber TelePresence for Windows DNS Server: Device Pool: Expressway: ILS: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 52 .

http://www.Locations: MRA: Speed Dial: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 53 .exam.

com 54 .exam. http://www.SIP TRUNK: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

E. D. F.) A. The DNS AOR records are wrong. B. Add the appropriate DNS SRV for the Internet entries on the DNS Server. audit endpoint modify endpoint create connection delete notification restart in progress end connections Answer: ACE QUESTION 64 Which task must you perform before deleting a transcoder? A. Answer: BCE QUESTION 63 With Media Gateway Control Protocol configuration on the voice gateway. Get Latest & Actual 300-075 Exam's Question and Answers from exam. The internal DNS Service (SRV) records need to be updated on the DNS Server.exam. C.com 55 . B. which three types of messages are involved in the call flow between the call agent and the voice gateway? (Choose three. E. D. Delete the dependency records. http://www.Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three. C.) A. The DNS server has the wrong IP address. Flush the DNS Cache on the client.

Use the Reset option. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone. B. C. D. F. The Cisco VCS and TMS controll the the Cisco TelePresence MCU. the Cisco Jabber for Windows Client. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP. 1 2 5 10 15 unlimited Answer: A QUESTION 66 Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. http://www.) A. The Cisco UCM is controlling the DX650. Answer: AC QUESTION 67 Scenario: There are two call control systems in this item. Answer: B QUESTION 65 How many active gatekeepers can you can define in a local zone? A.com 56 . B.B. D. Which two steps must the administrator take to add the SIP trunk? (Choose two. E. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Remove the subunit. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate. C. and the 9971 Video IP Phone. D. E. Delete the common device configuration. Remove the device pool. Unassign it from a media resource group. E. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server.exam. F. C. Set up a subzone on Cisco UCM with the peer address to the VCS cluster. and the Cisco Jabber TelePresence for Windows DP: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

exam. http://www.Locations: CSS: SRST: Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 57 .

SRST-BR2-Config: BR2 Config: Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.com 58 .exam.

http://www.exam.com 59 .SESTPSTNCall: Get Latest & Actual 300-075 Exam's Question and Answers from exam.

SAF Forwarders may exist in multiple autonomous systems. http://www...com 60 . D. B. Change the dial peer to dial-peer voice 9011 pots. Add the command prefix 9011 to the dial peer. In a multisite dial plan. the calls fail from the PSTN. Which two of the following configurations if applied to the router.. Answer: C QUESTION 69 Which statement is true regarding the configuration of SAF Forwarder? A.. direct-inward-dial port 0/0/0:13 C.. The router does not need to be configured..S//+44&/ exit ! voice translation-profile pstn-in translate called 1 ! voice-port 0/0/0:15 translation-profile incoming pstn-in E.exam. would remedy this situation? (Choose two.. dial-peer voice 1 pots incoming called-number 228822.) A.S//+44&/ exit ! voice translation-profile pstn-in translate called 1 ! voice-port 0/0/0:15 translation-profile incoming pstn-in D. C.. direct-inward-dial port 0/0/0:15 B. voice translation-rule 1 rule 1/rt228822. voice translation-rule 1 rule 1/rt228821. Get Latest & Actual 300-075 Exam's Question and Answers from exam. Answer: AD QUESTION 68 Refer to the exhibit. Change the dial peer to dial-peer voice 901 voip.After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001).. Add the command prefix 011 to the dial peer... dial-peer voice 1 pots incoming called-number 228822.. Which configuration change is needed to enable NANP international dialing during MGCP fallback? A.

B. The client label that is configured in Cisco Unified Communications Manager must match the
configuration
on the SAF Forwarder router.
C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as
SAF clients.
D. The destination IP address must match the loopback address of the SAF router.
Answer: A

QUESTION 70
Which technologies provide remote-site redundancy for Cisco IP Phones during a WAN failure?
A.
B.
C.
D.

SRST and MGCP fallback
SRST and TEHO
TEHO and MGCP fallback
SRST and AAR

Answer: A

QUESTION 71
What are two important considerations when implementing TEHO to reduce long-distance cost?
(Choose two.)
A.
B.
C.
D.

on-net calling patterns
E911 calling
number of route patterns
caller ID

Answer: BD

QUESTION 72
Which statement about TEHO is true?
A.
B.
C.
D.

The dial plan is simplified with local route groups.
Local route groups add complexity to the dial plan.
Toll charges can be reduced when TEHO is implemented with CAC.
Toll charges can be reduced when TEHO is implemented with MGCP fallback.

Answer: A

QUESTION 73
How are Cisco IP Phones directly configured to utilize local route groups?
A.
B.
C.
D.
E.

with Cisco Unified Communications Manager device pools
with Cisco Unified Communications Manager CSS and partitions
with Cisco Unified Communications Manager regions
with Cisco Unified Communications Manager locations
with Cisco Unified Communications Manager AAR

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

61

Answer: A

QUESTION 74
When you configure TEHO for long-distance calls and use the local PSTN gateways as fallback,
how many route patterns do you require for a cluster with five sites that are located in different
area codes?
A.
B.
C.
D.

15 when not using a local route group
6 when using a local route group
5 when using a local route group
10 when not using a local route group

Answer: B

QUESTION 75
Which two statements about international multisite dial plans are true? (Choose two.)
A.
B.
C.
D.

TEHO is legal in all countries.
TEHO is legal in most countries, but illegal in others.
TEHO reduces WAN utilization.
TEHO utilizes WAN links.

Answer: BD

QUESTION 76
What impact do roaming-sensitive settings and Device Mobility settings have on call routing?
A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the
AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the
AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings
modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility
settings, on the other hand, may have an impact on call routing because they modify the device
CSS, AAR group, and AAR CSS.
Answer: D

QUESTION 77
When device mobility mode is enabled or disabled for a cluster, to which does the cluster setting
apply?
A.
B.
C.
D.

all phones in the cluster that support device mobility
all phones in the cluster that subscribed to device mobility
mobile phones in the cluster that support device mobility
mobile phones in the cluster that are in default mode

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

62

QUESTION 78
Which statement is true when device mobility mode is enabled or disabled in the Phone
Configuration window?
A. The device mobility mode phone settings take precedence over the service parameter settings.
B. The service parameter settings take precedence over the device mobility mode phone settings.
C. The combined service parameter settings and the device mobility mode phone settings will be
used.
D. The default settings will be used due to the conflicts.
Answer: A

QUESTION 79
Which statement about the host portion format in Cisco Unified Communications Manager URI
dialing is false?
A.
B.
C.
D.

The host portion cannot start or end with a hyphen.
The host portion is not case sensitive.
The host portion accepts characters a-z, A-Z, 0-9, hyphens, and periods.
The host portion can have two periods in a row.

Answer: D

QUESTION 80
Which statement about setting up FindMe in Cisco TelePresence Video Communication Server is
true?
A.
B.
C.
D.

Users are allowed to delete or change the address of their principal devices.
Endpoints should register with an alias that is the same as an existing FindMe ID.
If VCS is using Cisco TMS provisioning, users manage their FindMe accounts via VCS.
A VCS cluster name must be configured.

Answer: D

QUESTION 81
Which system configuration is used to set a restriction on audio bandwidth?
A.
B.
C.
D.

region
location
physical location
licensing

Answer: B

QUESTION 82
Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured
on a VCS Expressway are true? (Choose two.)

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

63

under Enterprise Parameters Configuration B.165. http://www. This counter represents the total number of times that a call through locations failed due to the lack of bandwidth.230.200.323 and SIP payload traffic exiting the LAN1 interface. VCS rewrites the Layer 3 source address of outbound SIP and H.200. under Device > Device Settings > Device Defaults C. 1 2 5 10 15 unlimited Answer: A QUESTION 85 When video endpoints register with Cisco Unified Communications Manager. in Unified CM. C.165. What does the Cisco Unified Communications Manager "LocationOutOfResources" counter indicate? A. D. VCS applies 209.230 to outbound SIP and H. C.323 payload messages. This counter represents the total number of times since the last restart of the Cisco IP Voice Streaming Application that a Cisco Unified Communications Manager connection was lost. This counter represents the total number of failed video-stream requests (most likely due to lack of bandwidth) in the location where the person who initiated the video conference resides. in Unified CM. where are DSCP values configured? A. B. B. This counter represents the total number of times that a call on a particular Cisco Unified Communications Manager through the location failed due to lack of bandwidth. B. Answer: C Get Latest & Actual 300-075 Exam's Question and Answers from exam. Answer: AC QUESTION 83 The network administrator has been investigating bandwidth issues between the central office and remote sites where location-based CAC is implemented. D. VCS applies 209.200. in Unified CM.230 to outbound H. F. C.165.exam. D. under Service Parameters > Cisco CallManager Service > Cluster-wide Parameters D.323 packets to 209. E. With static NAT enabled on the LAN2 interface. Answer: B QUESTION 84 How many active gatekeepers can you can define in a local zone? A. The Advanced Networking or Dual Network Interfaces option key has been installed. DSCP parameters are always configured on each individual video endpoint.A.com 64 .

Which connection method is best for these two new customers? A.) Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 65 . H. B. E.323 H. C.245 H.164 with the + prefix format. D. B.QUESTION 86 Which statement best describes globalized call routing in Cisco Unified Communications Manager? A. All incoming calling numbers on the phones are displayed as an E.225 intercluster intracluster Answer: CD QUESTION 90 Assume that local route groups are configured. D.164 with the + prefix. which two configuration components are not changed? (Choose two. D.323 gatekeeper? A. Each site has a Cisco CallManager and an H.225 trunk (gatekeeper-controlled) intercluster trunk (non-gatekeeper controlled) SIP trunk intercluster trunk (gatekeeper-controlled) Answer: D QUESTION 89 Which two are gatekeeper-controlled trunk options that support gatekeeper call administration control? (Choose two.) A. B.323 gateway that allows connection to the PSTN. C. When an IP phone moves from one device mobility group to another. C. H.164 with the + prefix format. Answer: B QUESTION 87 Which device is used to connect to the H. H.exam. The CSS of all phones contain partitions assigned to route patterns that are in global format. E. D. C.323 gateway SIP trunk H. All called numbers sent out to the PSTN are in E.323 trunk MGCP gateway Answer: C QUESTION 88 The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. B.164 with the + prefix. Call routing is based on numbers represented as an E. http://www. All phone directory numbers are configured as an E.

com 66 . The secondary server keeps sending keepalive message to the primary server and when it succeeds. The phones never re-register with the primary server until the active (secondary) one goes down. the physical location and associated services have not changed. E. B. region location physical location licensing Answer: A QUESTION 93 During device failover to the secondary Cisco Unified Communications Manager server.A. F. E. When the primary server goes online. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.509 Subject Name from the VCS certificate. Get Latest & Actual 300-075 Exam's Question and Answers from exam. A SIP trunk security profile must be configured with the X. C. http://www. B. C. The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On. G. it unregisters the phones to force them to register to the primary. QUESTION 91 Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three. The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061. C. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.exam. it sends out an "ALIVE" message via broadcast so that the phones re-register. C. how does the phone recognize that the primary server is back? A. D. D. B.) A. D. A SIP trunk security profile must be configured with Device Security Mode set to TLS. Answer: ACE QUESTION 92 Which system configuration is used to set audio codecs? A. IP subnet user settings SRST reference region phone button settings Answer: BE Explanation: Although the phone may have moved from one subnet to another. B.

Answer: D QUESTION 94 If the device pool in the phone record does not match the device pools in the matching subnet. The phone sends keepalive messages to the primary server frequently and when it succeeds. C. EF/46 CS6/48 AF41/34 CS3/24 Answer: C QUESTION 97 Which feature allows you to specify which endpoints ring when someone calls a user on a specific destination ID? A. D. B. D. B. C. what will the system consider the phone to be? A. FindME Extension Mobility Speech Connect Single Number Reach Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. D. C.exam. http://www. regions description phone button template NTP information Answer: BC QUESTION 96 What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager? A.) A.D.com 67 . the phone re-registers with it. D. B. B. roaming unregistered unknown new device Answer: A QUESTION 95 Which two Cisco Extension Mobility attributes are available in the user device profile? (Choose two.

C. B. D. but only when they are registered to the VCS Control. C. show call-manager-fallback all show dial-peer voice summary show ephone summary show voice port summary Answer: A QUESTION 100 Which two options should be used to create a secure traversal zone between the Expressway-C and Expressway-E? (Choose two.) A. Where should the administrator look next to confirm that the correct DSCP markings are being set? A. http://www. B. voice ports. Answer: AC QUESTION 101 A video endpoint is configured with SIP only.QUESTION 98 The administrator at Company X is getting user reports of inconsistent quality on video calls between endpoints registered to Cisco Unified Communications Manager. A separate pair of traversal zones must be configured if an H. One Cisco Unified Communications traversal zone for H. D.com 68 . C.323 connection is required and Interworking is disabled. Answer: C QUESTION 99 Which command displays the detailed configuration of all the Cisco Unified IP phones. and dial peers of the Cisco Unified SRST router? A. E. SIP URI C. IP address B. B. The setting cannot be changed for video endpoints that are registered to Cisco Unified Communications Manager. Enable username and password authentication verification on Expressway-E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer. on the MGCP router at the edge of both networks the service parameters in the VCS Control the QoS service parameter in Cisco Unified Communications Manager on the actual Cisco phone itself because the DSCP setting is not part of its configuration file downloaded at registration E.323 and SIP connections.exam. Expressway-C and Expressway-E must trust each other's server certificate. D. What does a video endpoint use to register with the VCS Control? A. The administrator runs a wire trace while a video call is taking place and sees that the packets are not set to AF41 for desktop video as they should be. MAC address Get Latest & Actual 300-075 Exam's Question and Answers from exam.

_tcp.com _cuplogin. B. B.100. D. _collab-edge. system name Answer: B QUESTION 102 Which zone will the VCS Control use to route calls to the VCS Expressway? A. C.com _cisco-uds. http://www.example.100.com _collab-edge.com Answer: A QUESTION 106 Get Latest & Actual 300-075 Exam's Question and Answers from exam. To do this. D. B._tls.example.example.0) name@hostname name@IP Address (192.com 69 . which format must you use in the Search Rule? A. B.168. C.exam. which mechanism do you use to verify that the trunk has an active connection? A._udp. OPTIONS ping DNS tracing Continuous ping Dynamic DNS Answer: A QUESTION 105 Which DNS SRV Records must be configured on the external DNS server in a mobile remote access scenario with Cisco Expressway? A. D. C.D. name@domain IP Address (192. neighbor zone DNS zone traversal client zone ENUM zone Answer: C QUESTION 103 You want to configure Cisco VCS SIP endpoints and H._tcp. D.0) Answer: A QUESTION 104 When you connect a Cisco VCS Control to Cisco Unified Communications Manager by using a SIP trunk.example.168.323 endpoints so that they communicate with one another. C.

Which two additional steps are needed to complete this deployment? (Choose two. The Expressway server needs a neighbor zone created that points to Cisco UCM. devices outside cannot register. on the voice-enabled firewall at the edge of the network on the VCS under Configuration > registration > configuration on the TMS server under Registrations > whitelist on the VCS under System > configuration > Registrations Answer: B QUESTION 109 Which statement about configuring the Cisco VCS Control and Cisco VCS Expressway is true? A. D. E. Answer: B QUESTION 108 The VCS Expressway can be configured with security controls to safeguard external calls and endpoints.) A. C. but it must be located in the DMZ with the Expressway.exam.Company X currently uses a Cisco Unified Communications Manager. However. a VPN must be set up before their Jabber client can be used. B. The firewall at Company X requires a rule to allow all traffic from the DMZ to pass to the same network that the VCS Control is on. D. An additional interface must be enabled on the Cisco UCM and placed in the same subnet at the Expressway. The customer firewall must be configured with any rule for the IP address of the external Jabber client. The VCS Control should not be on the LAN. Users report however that whenever they are out of the office. Jabber cannot connect to Cisco UCM unless it is on the same network or a VPN is set up from outside. http://www. the users report that calls via the VCS are erratic and not very consistent. One such option is the control of trusted endpoints via a whitelist. The firewall at Company X must have all SIP ALG functions disabled. C. Where is this option enabled? A. A TMS server is needed to allow the firewall traversal to occur between the VCS Expressway and the VCS Control servers. Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 70 . You do not need to configure search rules for traversal calls. D. B. Answer: AD QUESTION 107 A new administrator at Company X has deployed a VCS Control on the LAN and VCS Expressway in the DMZ to facilitate VPN-less SIP calls with users outside of the network. A SIP trunk has to be set up between the Expressway-C and Cisco UCM. which has been configured for IP desk phones and Jabber soft phones. C. B. The administrator for Company X has deployed a Collaboration Expressway server at the edge of the network in an attempt to remove the need for VPN when doing voice. However. What must the administrator configure on the firewall to stabilize this deployment? A.

C. Where does the administrator go to create a default profile? A. B.exam. System > Call Manager > Clusterwide > Service Parameters > RSVP System > Service Parameters > RSVP System > Service Parameters > Call Manager > Clusterwide parameters > RSVP on each MGCP gateway at all remote locations Answer: C QUESTION 111 Where can you change the clusterwide DSCP setting for Cisco Unified Communications Manager? A. http://www. D. Answer: D QUESTION 110 Company X wants to implement RSVP-based Call Admission Control and move away from the current location-based configuration. D. You need to configure the firewall to allow communication from the Cisco VCS Expressway to the Cisco VCS Control. The Cisco VCS Expressway is the Traversal Server. C. C. B. The username on the Cisco VCS Control and Cisco VCS Expressway are local and do not need to match. D. enterprise parameters service parameters enterprise phone configuration Ethernet configuration Answer: B QUESTION 112 Refer to the exhibit.com 71 . What is the correct value to use for the "DSCP for TelePresence Calls" Cisco CallManager service parameter? Get Latest & Actual 300-075 Exam's Question and Answers from exam.B.

http://www.A. B. D. C. B. Cisco Unified Communications Manager Express in SRST mode supports more Cisco IP Phones Get Latest & Actual 300-075 Exam's Question and Answers from exam. 28 (011100) 34 (100010) 41 (101001) 46 (101110) Answer: B QUESTION 113 Which two statements about remote survivability are true? (Choose two. SRST supports more Cisco IP Phones than Cisco Unified Communications Manager Express in SRST mode.) A.com 72 .exam.

C. E. B. MGCP fallback is required for ISDN call preservation. C.com 73 . B.323 call survivability for all calls? (Choose three. C. D. 1 5 2 4 3 6 Answer: C QUESTION 116 Which three CLI commands are used when configuring H. B.than SRST.) A. D. how many backup servers can be configured in a Cisco Unified Communications Manager Group? A. C. SCCP fallback Cisco Unified Survivable Remote Site Telephony Cisco Unified Communications Manager Express MGCP fallback Cisco Unified Communications Manager Express in SRST mode Answer: BE QUESTION 115 When considering Cisco Unified Communications Manager failover. voice service voip telephony-service h323 call preserve call-router h323-annexg transfer-system Answer: ACD QUESTION 117 When configuring Cisco Unified Survivable Remote Site Telephony. MGCP fallback functions with SRST.) A. http://www. E. E. D.exam. D. Answer: AD QUESTION 114 Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all Cisco Unified Communications Manager systems? (Choose two. F. F. which CLI command enables this feature on the router? Get Latest & Actual 300-075 Exam's Question and Answers from exam.

That day the help desk received several calls from the branch saying their voicemail was not working but they were Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. stop the Unified CM service on the primary call manager. During a predetermined maintenance window. D. Devices should reregister with the backup Unified CM in the Cisco CallManager Group. Answer: D QUESTION 120 Which three commands can be used to verify SRST fallback mode? (Choose three. D. stop the Unified CM service on the Publisher. C.com 74 . E.A. Devices should reregister with the backup Unified CM in the Cisco CallManager Group. During a predetermined maintenance window. D. During a predetermined maintenance window. B. B. stop the TFTP service on the primary call manager. http://www. C. Devices should reregister with the backup Unified CM in the CallManager Group. 45 sec 30 sec 60 sec 120 sec Answer: B QUESTION 119 Which option is a valid test scenario to verify that Cisco Unified Communications Manager failover works and endpoints register with the backup call manager? A. During a predetermined maintenance window. the WAN connection to a branch office failed and stayed down for 45 minutes. One Monday at 2:00 pm. show telephony-service all show telephony-service ephone-dn show telephony-service ephone show telephony-service voice-port show telephony-service tftp-bindings Answer: ABC QUESTION 121 Company X has a Cisco Unified Communications Manager cluster and a Cisco Unity Connection cluster at its head office and implemented SRST for its branch offices. D.) A. call-manager-fallback ccm-manager redundant-host ccm-manager sccp local ccm-manager switchback Answer: A QUESTION 118 How long is the default keepalive period for SRST in Cisco IOS? A. B. Devices should reregister with the backup Publisher in the Cisco CallManager Group.exam. C. stop the Cisco IP Phone Services service on the primary Unified CM. B.

E.com 75 . B. C. B.164 alternate number under Directory Number Settings Device Information under Phone Configuration Route Pattern under Route/Hunt Answer: B Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. B.164 number that is advertised globally via ILS? A. D. The voice administrators at the head office did not call the users to notify them. where do you configure the +E. ILS contains an optional directory URI replication feature that allows the clusters in an ILS network to replicate their directory URIs to the other clusters in the ILS network. If the ILS and directory URI replication feature is disabled on a cluster.) A. Why did the users not realize the WAN was down and prevented access to their voicemail? A. C.able to make and receive calls. B. C. on-net calling patterns E911 calling number of route patterns caller ID Answer: BD QUESTION 123 Which two statements about the use of the Intercluster Lookup Service in a multicluster environment are true? (Choose two.exam. Answer: AB QUESTION 124 In Cisco Unified Communications Manager. the users should have noticed that the phone displays said "SRST Fallback Active". All the phones should have started ringing the instant the WAN connection failed to signal the start of SRST mode. check the Exchange Directory URIs with Remote Clusters check box that appears in the SIP trunk configuration menu. To enable URI replication in a cluster. http://www. D.) A. this cluster still accepts ILS advertisements and directory URIs from other neighbor clusters. Answer: C QUESTION 122 What are two important considerations when implementing TEHO to reduce long-distance cost? (Choose two. D. D. Cisco Unified Communications Manager uses the ILS to support intercluster URI dialing. Directory URI replication does not need to be enabled individually for each cluster. Although the phones were still working. All calls should have dropped when the WAN failed so users would be instantly aware. ILS configuration under Advanced Features +E. it just does not advertise its local directory URIs.

what must be present for SRST to work successfully? A. The SAF Client Control is a non-configurable inherent component of Cisco Unified Communications Manager. how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? A. D. D. D. The SAF Client Control is a non-configurable inherent component of the Cisco IOS Routers. C. Answer: B QUESTION 128 Which statement about the SAF Client Control is correct? A. The SAF Client Control is a configurable inherent component of the Cisco IOS Routers. D.com 76 .exam. B. B. B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page. B. C. Answer: B QUESTION 129 Get Latest & Actual 300-075 Exam's Question and Answers from exam. The SAF Client Control is a configurable inherent component of Cisco Unified Communications Manager. C. http://www. C.QUESTION 125 When implementing a dial plan for multisite deployments. dial peers that address all sites in the multisite cluster translation patterns that apply to the local PSTN for each gateway incoming and outgoing COR lists configuration of the gateway as an MGCP gateway Answer: B QUESTION 126 Which code snippet is required for SAF to be initialized? A. Configure the publisher node only in the SAF Forwarder configuration page. Service Family External-Client router eigrp topology base Answer: C QUESTION 127 When using SAF. Configure the SAF Security Profile Configuration to support only a single node. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.

B. Delete the trunk from the CCD requesting service node. B. location controller route pattern route string URI Answer: C QUESTION 132 Refer to the exhibit.exam. Redirect CCD advertising and requesting services to another Cisco Unified Communications Manager. Disassociate the trunk from the CCD advertising service or CCD requesting service.) Get Latest & Actual 300-075 Exam's Question and Answers from exam. what must you do first? A.com 77 . C. which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two. C. Fullmesh Automesh ILS updates multicast Answer: B QUESTION 131 Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information? A. D. D. http://www. B.If you want to delete a SAF-enabled trunk from Cisco Unified Communications Manager Administration. C. Place the Cisco Unified Communications Manager node in standby mode. If an IP phone in San Jose roams to New York. Answer: A QUESTION 130 Which functionality does ILS use to link all hub clusters in an ILS network? A. D.

http://www. so the phone is considered to be in its home location. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone. soft key templates. C. Device Mobility will reconfigure the roamingsensitive settings of the phone. The user can log in but does not have access to any features. E. Answer: B QUESTION 134 Get Latest & Actual 300-075 Exam's Question and Answers from exam. The Extension Mobility log in fails. D. so the configuration of the phone is not modified. B. C. The device takes on the default device profile for its type. The physical locations are different. so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.com 78 . The device uses the first device profile assigned to the user in Cisco Unified Communications Manager. or button templates. D.exam. The Device Mobility information is associated with the home device pool of the phone.A. B. Answer: BC QUESTION 133 What happens when a user logs in using the Cisco Extension Mobility Service on a device for which the user has no user device profile? A. The physical locations are not different. so the roaming-sensitive parameters of the roaming device pool are applied. so one of the associated device pools is chosen based on a round-robin load-sharing algorithm. The device mobility groups are the same.

C. Check the Home Cluster checkbox on the End User Configuration page. C. E. Subscribe the extension mobility IP Phone Service to the user Device Profile. Calling Party Transformation Calling Search Space under Remote Destination Profile Information User Local under Remote Destination Profile Information Rerouting Calling Search Space under Remote Destination Profile Information Rerouting Calling Search Space under Remote Destination information Calling Search Space under Phone Configuration Answer: C QUESTION 137 Which two bandwidth management parameters are available during the configuration of Cisco Unified Communications Manager regions? (Choose two. E. C. Unsubscribe all other services from the Cisco IP Phone. Create the extension mobility IP Phone Service.com 79 . Answer: AEF QUESTION 135 How many Cisco Unified Mobility destinations can be configured per user? A. 1 10 4 6 Answer: B QUESTION 136 When configuring Cisco Unified Mobility. D. Default Audio Call Rate Max Audio Bit Rate Default Video Call Rate Max Video Call Bit Rate (Includes Audio) Max Number of Video Sessions Answer: BD QUESTION 138 In Cisco Unified Communications Manager. http://www.Which three steps are required when configuring extension mobility in Cisco Unified Communications Manager? (Choose three. B. where do you configure the default bit rate for audio and video devices? Get Latest & Actual 300-075 Exam's Question and Answers from exam. D. F. D. B. C. E. Create a user Device Profile. B. D. Check the Enable Extension Mobility checkbox on the Directory Number Configuration page. which parameter defines the access control for a call that reaches out to a remote destination? A.) A. B.) A.exam.

B. you must configure MTP resources on the gatekeeper and only use G. Answer: B QUESTION 142 When you use the Query wizard to configure the trace and log central feature to collect install logs. what determines the number of sessions that is supported on each DSP? A. C. TLC adjusts the time change appropriately. Enterprise Parameters Region under Region Information Cisco CallManager service under Service Parameter Configuration Enterprise Phone Configuration Answer: C QUESTION 139 Which module is the minimum PVDM3 module needed to support video transcoding? A.323 gatekeeper. TLC produces an error and must be run remotely. TLC queries for the time zone as part of configuration.729 requires 24K of bandwidth per call. http://www. G. which time is used? A. C. C.exam.A. B. if you have servers in a cluster in a different time zone. C. PVDM3-32 PVDM3-64 PVDM3-128 PVDM3-192 Answer: C QUESTION 140 When implementing a Media Termination Point. D. G. D. C.com 80 . B. B. D. D.711 between regions. TLC uses its local time for all systems. the codecs that are used in universal transcoding mode the size of the cluster that is being designed the number of full-duplex media streams the Cisco Unified Communications Manager node setting Answer: A QUESTION 141 Which statement is true when considering a Cisco VoIP environment for regional configuration? A. D. To deploy a Cisco H.711 requires 128K of bandwidth per call. B. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment. Get Latest & Actual 300-075 Exam's Question and Answers from exam.

exam. C.Answer: A QUESTION 143 When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco VCS Control. which portion of the destination URI is the is the first match that is attempted? A. What is the correct DSCP value to use when configuring a class map in a Cisco IOS router? Get Latest & Actual 300-075 Exam's Question and Answers from exam. The "DSCP for Video Calls" Cisco CallManager service parameter is set to 34. B. intercluster trunk with gatekeeper control intercluster trunk without gatekeeper control SIP trunk h225 trunk Answer: B QUESTION 145 Refer to the exhibit.com 81 . the full URI. without the domain portion the E. C. including the domain portion the destination alias. Which trunk type is implemented in this network? A. D. calls are routed to and from intercluster trunks. http://www. D.164 number that is assigned to the Cisco TelePresence EX90 the directory number that is assigned to the Cisco TelePresence EX90 Answer: B QUESTION 144 In a distributed call processing network with locations-based CAC. B.

com 82 . C. C.A. D. B. Answer: D QUESTION 149 Refer to the exhibit. When configuring SIP precondition. C. The configuration is done by selecting a SIP precondition trunk for trunk type. cs4 ef af23 af41 Answer: D QUESTION 146 What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager? A. EF/46 CS6/48 AF41/34 CS3/24 CS4/32 Answer: E QUESTION 147 How is a SIP trunk in Cisco Unified Communications Manager configured for SIP precondition? A.exam. SIP precondition is configured by configuring a new SIP profile and selecting E2E for RSVP over SIP. B. E. D. C. SIP trunk will always require RSVP agents regardless of what RSVP type is configured. D. The new SIP profile must then be assigned to the SIP trunk. B. D. B. When configuring SIP precondition. When configuring SIP precondition. the SIP trunk must have access to an RSVP agent. the IP phones must have access to an RSVP agent. E. the IP phones and SIP trunk must have access to an RSVP agent. http://www. RSVP agents are only required for the IP phones. Assume that NANP is being used and 9 is used for PSTN access code Long Get Latest & Actual 300-075 Exam's Question and Answers from exam. SIP trunks require RSVP agents only when fall back to local RSVP is configured. The configuration is automatically selected when RSVP is enabled for the location assigned to the trunk. SIP precondition is configured by selecting E2E for RSVP over SIP on the default SIP profile assigned to the SIP trunk. Answer: D QUESTION 148 Which statement about SIP precondition is most correct? A.

The first route group contains the H 225 trunk. Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice. The first route group contains the H 225 trunk. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups. C.exam. The first route group contains the H 226 trunk.com 83 . How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups? A. The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups. B. Assign this route pattern to a route list that points to two route groups. The second route group contains MGCP gateway. D. Configure a route pattern for 4085543XXX.distance national calls are preceded with 1. http://www. The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.

The PSTN user hears a reorder tone. The configuration field "Significant Digits for inbound calls" is left at default (All).323 gateway configuration is 4. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4. Apply the voice translation profile to the Voice-port.) A. C. B. D.QUESTION 150 Refer to the exhibit. An inbound PSTN call to this H. Answer: BE Explanation: Get Latest & Actual 300-075 Exam's Question and Answers from exam. Which two configuration changes can correct this issue? (Choose two. Add the command h323-gateway voip id on interface vlan120.com 84 . IT shows an H.323 gateway fails to connect to IP phone extension 2001. Add port 1/0:23 to dial-peer voice 123 pots. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration in a Cisco Unified Communications Manager environment.exam. Debug isdn q931 on the H. E.323 gateway shows the correct called-party number as 5015552001. Add a voice translation profile to truncate the number from 10 digits to 4 digits. http://www.

D. Cisco Unified Communications Manager has gatekeeper functionality built in. Get Latest & Actual 300-075 Exam's Question and Answers from exam. route pattern should be 91201. E. Cisco Unified Communications Manager registers with a gatekeeper via SIP.320 gateways are provisioned in Cisco Unified CallManager as H. The remote office has an MGCP gateway and the HQ office has an H. C. QUESTION 151 Which device is needed to integrate H. http://www. A gatekeeper can enable CAC and AAR. You have been asked to implement TEHO from a remote branch office with area code 301 to the HQ office with area code 201 using Cisco Unified Communications Manager.) A. QUESTION 152 The following exhibit shows configs for H. D. C.[2-9]XXXXXX with Discard Digit as Predot route pattern should be 91201. video gateway MGCP gateway H.323 MCUs. Which statement about the route pattern is true? A. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called.323 gatekeeper MCU Answer: C Explanation: As with H.1201[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 Answer: A QUESTION 153 Which two statements about the functionality of a gatekeeper are true? (Choose two. from 0 to 32.323 gateway.[2-9]XXXXXX route pattern should be 9. B.323.320 into the Cisco video solution? A. B.[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 route pattern should be 91201.Choose the number of significant digits to collect. C. B.1201[2-9]XXXXXX with Discard Digit as Predot route pattern should be 9. Once the call arrives at the HQ.exam.323 gateways. and then route patterns are configured to extend calls to these devices.323 gateway.com 85 . D. H. Cisco Unified Communications Manager registers with a gatekeeper via H. it should break out to the PSTN as a seven-digit local call.

A gatekeeper can simplify the dial plan between many different Cisco Unified Communications Manager clusters.exam. C. H. D. http://www. SIP preconditions enable RSVP between Cisco IP Phones. Use the command bandwidth 10.E. D. but not AAR. SIP preconditions enable end-to-end RSVP over an SIP trunk. B.323 SIP Skinny H. A gatekeeper can replace the dial plan of a Cisco Unified Communications Manager cluster. C.com 86 . C. Answer: C QUESTION 156 For which VoIP protocol does a gatekeeper provide address translation and control access? A. SIP preconditions enable end-to-end RSVP for calls through the PSTN. Use the command bandwidth session 10. A gatekeeper can enable CAC. SIP preconditions can be enabled in a gatekeeper. Use the command bandwidth 1280. B.248 Answer: A QUESTION 157 Which CAC configuration on a gatekeeper restricts to 10 G. Answer: B QUESTION 158 What user profile is used to define the settings for a user on login? Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. Gatekeepers can be implemented to deploy RSVP-based CAC. D. Use the command bandwidth 160. C. Answer: A QUESTION 155 Which statement about the function of a gatekeeper is true? A. A gatekeeper improves call routing between servers within a single Cisco Unified Communications Manager cluster. B.711 audio calls? A. D. Answer: CE QUESTION 154 Which option describes a function of SIP preconditions? A.

A.164 PSTN number when using Cisco Unified Communications Manager Express in SRST mode? A. SRST can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. B. B. C. Answer: A QUESTION 160 What command is used to map internal extensions to the corresponding E. Cisco Unified Communications Manager Express in SRST mode can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. C. C.164 ephone-transnumber Answer: B QUESTION 161 Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco IP Telephony Authentication and Encryption Fundamentals) A. Device Profile Group Profile Pool Profile Specific Profile Answer: A QUESTION 159 Which statement about technology implementation strategy is true? A. A. CAPF enrollment supports the use of authentication strings.exam. LSCs are issued by the Cisco CTL client or by the CAPF. E. http://www.com 87 . B. D. a Cisco Unified CallManager has been removed Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. D. MICs are issued by the CAPF itself or by an external CA. ephone-dn dialplan-pattern number number-e. SRST and MGCP fallback can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. D. The CAPF itself has to enroll with the Cisco CTL client. C. D. Cisco Unified Communications Manager Express can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. Answer: A QUESTION 162 An update of the configuration using the Cisco CTL client not needed when _______.

A public key is made freely available to anyone who might Get Latest & Actual 300-075 Exam's Question and Answers from exam. Answer: C Explanation: GARP (Gratuitous ARP) announce the presence of IP Phone on the network. Answer: CD Explanation: You must also add the application users or the end users to the Standard CTI Secure Connection user group in Cisco Unified Communications Manager Administration to enable TLS for the application. the encryption key equals the decryption key. GARP can be disabled at Cisco IP phones. D.) A. QUESTION 165 Which two statements about symmetric encryption are true? (Choose two. Symmetric encryption is a good choice for real-time encryption of bulk data. D. Enter the encryption key into the application. Configure related security parameters in the CTI. After you add the user to this group and install the certificate. B. B. GARP attacks require access to the target LAN or VLAN. C.com 88 . and TAPI applications requires which two tasks? (Choose two. the application ensures that the user connects via the TLS port. D. C. JTAPI. Standard CTI Allow Reception of SRTP Key Material user group. JTAPI. and TAPI application. Answer: AC Explanation: There are two basic techniques for encrypting information: symmetric encryption (also called secret key encryption) and asymmetric encryption (also called public key encryption. QUESTION 164 Enabling authentication and encryption for CTI. an LSC of the IP phone is upgraded C. they can encrypt and decrypt all messages that use this key. http://www. B. an IP address of the Cisco TFTP server has been changed Answer: B QUESTION 163 Which statement is not true about GARP? A. With symmetric encryption. Set up an IPsec association between the application and Cisco Unified CallManager.B. and Standard CTI Enabled user group.exam.) A. GARP is normally used for HSRP. Add the application user or end users to the Standard CTI Secure Connection user group. GARP can be used for a man-in-the-middle attack. C. Symmetric encryption is commonly used to sign asymmetric keys. a security token is added to the system D.) in symmetric key As long as both sender and recipient know the secret key. Symmetric encryption uses asymmetric keys.

QUESTION 166 Refer to the exhibit. A second. private key is kept secret. D. so that only you know it. but it will experience poor audio quality.want to send you a message. The call will get through without any issues.com 89 . http://www. What Get Latest & Actual 300-075 Exam's Question and Answers from exam. What happens when the fourth call is placed from HO to BR? A. B. Answer: B QUESTION 167 Video calls using 384 kbps need to be supported across a gatekeeper-controlled trunk.exam. Assume that the priority queue has been provisioned correctly for three G. C. Locations-based CAC has been configured between HQ and the BR site.729 calls. The call will be queued until one of the existing calls drop. The call will get through via the WAN. The call will fail.

exam. E. C. D. C. what step is mandatory to reach remote sites while in SRST mode? A. Configure CFUR. Enable Cisco Remote Site Reachability. SIP trunk CallManager route patterns translation patterns POTS dial peers Get Latest & Actual 300-075 Exam's Question and Answers from exam. Enable the SRST checkbox in the MGCP gateway. http://www. Enable the Failover Service parameter. D. the video rate increases to maintain a total bandwidth of 384 kb/s.729 (at 24 kb/s). Cisco Unified SRST uses Simple Network Auto Provisioning (SNAP) technology to auto-configure a branch office router to provide call processing for the Cisco Unified IP phones that are registered with the router.323 gateway for SRST in Cisco Unified Communications Manager.com 90 . C. B.711 at 64 kb/s (for audio) plus 320 kb/s (for video). B. Cisco Unified Gateway Duplication Cisco Unified CallManager Redundancy Cisco Unified SRST Cisco Unified Call Survivability Answer: C Explanation: When the system automatically detects a failure. QUESTION 168 In what Cisco solution is Simple Network-Enabled Auto Provision technology used? A. 768 kbps 384 kbps 512 kbps 192 kbps Answer: B Explanation: A 384-kb/s video call may comprise G. D. QUESTION 170 While operating in SRST. C. This sum does not include overhead.value should be entered into the gatekeeper to support this bandwidth? A. If the audio codec for a video call is G. QUESTION 169 While configuring Call Survivability in Cisco Unified Communications Manager. what is needed to route calls outside of the remote site location to the PSTN? A. B. D. Configure the H. B. Answer: B Explanation: Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through the PSTN when an endpoint is considered unregistered due to a remote WAN link failure.

C. B.exam.com 91 .E. which three commands must be configured in the MGCP fallback router? (Choose three. F. http://www. B. B. D. E. Cisco Unified Communications Manager Administration IP phone display Cisco Unified SRST Router Cisco Unified MGCP Fallback Router physical IP phone settings Answer: BE Explanation: IP Phone display and Physical phone IP settings are two locations were an end user can determine if an IP phone is working in SRST mode. QUESTION 174 Get Latest & Actual 300-075 Exam's Question and Answers from exam. E. 3 6 2 4 1 5 Answer: B QUESTION 172 To preserve analog calls in an MGCP switchback event.) A. C. h323 mgcp-switchback-graceful voice service voip mgcp-graceful preserve-h323 no h225 timeout keepalive Answer: ACF QUESTION 173 Which two locations are the best locations that an end user can use to determine if an IP phone is working in SRST mode? (Choose two. VOIP dial peers Answer: D Explanation: in time of srst configuration on router. please configure a dial-peer so that call flow in SRST mode. D. D.) A. how many multicast music on hold streams can be utilized by the system at any given time? A. F. QUESTION 171 When using Cisco Unified Communications Manager Express in SRST mode. E. C.

Add a null route to the publisher Cisco Unified Communications Manager at the remote router. B. Remove the null route when the operation is verified. Unplug the IP phones from their switch ports.com 92 . C. D. Answer: C QUESTION 175 Drag and Drop Question Answer: Get Latest & Actual 300-075 Exam's Question and Answers from exam. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers. http://www.What is the fastest way for an engineer to test the implementation of SRST in a production environment? A. Shut down the Cisco Unified Communications Manager Servers.exam. Verification is not needed. E.

QUESTION 176 You are the Cisco Unified Communications Manager in Certpaper. E.) A. The command ccm-manager mgcp-fallback must be configured. F. B. The OPTIONS request may go to a different set of remote destinations each time if a DNS SRV record (configured on Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 93 . D. COR needs to be configured to disallow outbound calls. D.323 gateway Answer: AD Explanation: For SIP trunks. http://www. POTS dial peers must be added to the gateway to route calls from the IP phones to the PSTN.exam. You use a remote site MGCP gateway to provide redundancy when connectivity to the central Cisco Unified Communications Manager cluster is lost. C. Answer: ABC QUESTION 177 Which two configurations provide the best SIP trunk redundancy with Cisco Unified Communications Manager? (Choose two.) A. C. The order of the IP addresses depends on the DNS response and may be identical in each DNS query. B.com. The default service must be enabled globally. Configure all SIP trunks with DNS SRV Configure all SIP trunks with Cisco Unified Border Element Configure all SIP trunks to point to a SIP gateway Configure SIP trunks to be members of route groups and route lists Configure all SIP trunks to allow TCP ports 5060 Configure all SIP trunks to point to a gatekeeper through SIP to H. Cisco Unified Communications Manager supports up to 16 IP addresses for each DNS SRV and up to 10 IP addresses for each DNS host name. How to enable IP phones to establish calls to the PSTN when they have registered with the gateway? (Choose three.

C. E. you need to configure the router for Survivable Remote Site Telephony in case the Cisco Unified Communications Manger stops working. B. On which two factors would the number of IP phones and Directory Numbers that can register to the SRST router depend? (Choose two. the status of a SIP trunk may change because of a change in the way a DNS query gets resolved. B. voice service voip h323 call preserve call preservation not possible with H. B.) A.323 call-manager-fallback preserve-call dial-peer voice 1 voip call preserve Get Latest & Actual 300-075 Exam's Question and Answers from exam. or if a host name (configured on the SIP trunk) resolves to more than 10 IP addresses. automatically back to the primary Cisco Unified Communications Manager cluster manually back to the primary Cisco Unified Communications Manager cluster automatically back to the secondary Cisco Unified Communications Manager cluster manually back to the secondary Cisco Unified Communications Manager cluster Answer: A QUESTION 181 Which option configures call preservation for H.com 94 .the SIP trunk) resolves to more than 16 IP addresses. The protocol that is used in Cisco Unified Communications Manager Cisco Unified Communications Manager version Cisco IOS Software version WAN link bandwidth capacity of the Cisco Media Convergence Server router platform Answer: CF QUESTION 179 Which remote-site redundancy technology fails over to POTS dial peers from the Cisco Unified Communications Manager dial plan during a WAN failure? A. MGCP fallback H. Thus. C. QUESTION 178 When you configure Cisco Unified Communications Manager. C.323-based SRST mode? A. D. not because of any change in the status of any of the remote destinations. D. F. http://www. B.323 fallback SCCP fallback SIP fallback Answer: A QUESTION 180 How does the system intelligently shift call processing upon restoration of WAN connectivity? A. D. D. C.exam.

ccm-manager switchover-to-backup mgcp use backup ccm-manager register backup not supported Answer: A QUESTION 185 This is the configuration on the voice gateway: telephony-service max-ephones 30 max-dn 60 preference 0 srst mode auto-provision all srst dn line-mode dual srst dn template 3 srst ephone description srst fallback auto-provision phone srst ephone template 5 Which ephone-dn would be expected upon activation of SRST? Get Latest & Actual 300-075 Exam's Question and Answers from exam. D. Configure CSS and partitions in the SRST ISR.exam. Configure COR in the SRST ISR. D. C. How can international calls be blocked while national calls are allowed for branch office Cisco IP Phones during a WAN failure? A. C. direct-inward-dial voice translation-rule incoming called-number application Answer: A QUESTION 183 A Cisco Unified Communications Manager cluster is installed in headquarters only. B. D. Configure voice translations in the SRST ISR.com 95 . B. B. C. http://www. Configure CSS and partitions in Cisco Unified Communications Manager and apply the CSS and partitions to the SRST ISR. Answer: C QUESTION 184 Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? A.Answer: A QUESTION 182 Which configuration command disables the secondary dial tone on the branch office ISR for users calling from the PSTN into the branch office during a WAN failure? A.

D.A.exam. ephone-dn 1 number 7001 description 7001 name 7001 ephone-dn-template 5 This DN is learned from srst fallback ephones D. E. D. ephone-dn 1 dual-line number 7001 description 7001 name 7001 ephone-dn-template 5 This DN is learned from srst fallback ephones B. http://www. B.com 96 . a means to allow the local site to continue to send and receive calls in the event of a WAN failure a means to route calls on-net through other sites during high utilization periods a method that allows for backup calls in the event that your gateway fails the ability to force a call out of a certain trunk when the Cisco Unified Communications Manager is being upgraded Answer: A QUESTION 187 What component acts as a user agent for both ends of a SIP call while Cisco Unified SIP SRST is providing failover during a WAN outage? A. ephone-dn 1 number 7001 description 7001 name 7001 ephone-dn-template 3 This DN is learned from srst fallback ephones Answer: A QUESTION 186 Which ability does the Survivable Remote Site Telephony feature provide? A. ephone-dn 1 dual-line number 7001 description 7001 name 7001 ephone-dn-template 3 This DN is learned from srst fallback ephones C. B2BUA SIP server SIP proxy SIP SRST router SIP registrar Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. C. C.

) A. Initiating a process to provide call-processing backup redundancy. D. Define the SRST reference in the configuration on the IP Phones. C. Cisco Unified Communications Manager does not Get Latest & Actual 300-075 Exam's Question and Answers from exam. E. E. D. Answer: AB QUESTION 190 Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three) A. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode. C. B. Answer: ABC QUESTION 191 Which method can be used to address variable-length dial plans? A. D. SRST Gateway setting in Cisco Unified Communications Manager SRST Reference configured in Cisco Unified Communications Manager Device Pool SRST Reference setting Call Manager Group setting Cisco Unified Communications Locations setting Answer: BC QUESTION 189 Which of the following are two functions that ensure that the telephony capabilities stay operational in the remote location Cisco Unified SRST router? (Choose two) A. http://www. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically.com 97 . C. Add a prefix for all calls that are longer than 10-digits long Use nested translation patterns to eliminate inter-digit timeout Use the @macro on the route pattern Use MGCP gateways. Automatically detecting a failure in the network. B. Proactively repairing issues in the voice network. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways. C. Define the SRST reference for phones in the Device Pool configuration B. B. Notifying the administrator of an issue for manual intervention. Enable SIP trunking between both remote and hub sites to provide mesh coverage. Overlap sending and receiving. which support variable-length dial plans Answer: A Explanation: If the dial plan contains overlapping patterns. E.exam. D. F.QUESTION 188 Which two configurations are needed to implement SRST in Cisco Unified Communications Manager? (Choose two.

route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to choose a current match). E. http://www. Answer: D QUESTION 193 Which two features require or may require configuring a SIP trunk? (Choose two. Which trunks would be most suitable for Connection Y? A. Check this check box to interrupt interdigit timing when Cisco Unified Communications Manager must route a call immediately. The Cisco Unified Communications Manager will automatically forward the calls over the WAN if the destination directory number is not registered locally. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified Communications Manager Express C. Cisco recommends that you do not uncheck the check box.S. Unless your dial plan contains overlapping patterns or variable length patterns that contain!. By default.exam.) A. an H. D.225 trunk (gatekeeper-controlled) intercluster trunk (gatekeeper-controlled) a SIP trunk on the U. Cisco Device Mobility D. QUESTION 192 Refer to the exhibit. As long as IP connectivity exists. the Urgent Priority check box displays as checked. C. SIP gateway B.com 98 . cluster and an intercluster trunk on the remote cluster intercluster trunk (nongatekeeper-controlled) No extra connections are required. Cisco Unified Mobility E. B. you need only configure a route pattern for each site. registering a SIP phone Get Latest & Actual 300-075 Exam's Question and Answers from exam.

D. H. Normalization is done using the gateway incoming called party prefixes based on number type. C. Normalization is done using the gateway incoming called party prefixes based on number type.exam.com 99 . Normalization is done using translation patterns.323 gateway or Cisco 3800 series router.Answer: AB Explanation: All protocols require that either a signaling interface (trunk) or a gateway be created to accept and originate calls. such as cellular phones. how does the calling number get normalized to a global E. how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager? A. Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. The specific model will be selected after the Cisco 3800 is selected. Normalization is achieved by local route group that is assigned to the MGCP gateway. E. E. B. Normalization is done using route patterns. C. E. B. Answer: D Explanation: Configuring calling party normalization alleviates issues with toll bypass where the call is routed to multiple locations over the IP WAN.323 gateway. Normalization is achieved by local route group that is assigned to the MGCP gateway. QUESTION 195 When an incoming PSTN call arrives at an MGCP gateway. D. it allows Cisco Unified Communications Manager to distinguish the origin of the call to globalize or localize the calling party number for the phone user. QUESTION 194 A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H. Cisco Unified Mobility gives users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to different designated phones. D. B.164 number with the + prefix in Cisco Unified Communications Manager? A. What should the gateway type be? A. Device mobility allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location.323 gateway Cisco 3825 Cisco 3800 series router. Answer: A QUESTION 67 When an incoming PSTN call arrives at an MGCP gateway. http://www.323 gateway or Cisco 3825 series router. Normalization is done using route patterns. Normalization is done using the gateway incoming calling party prefixes based on number type. C. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway. Normalization is done using the gateway incoming calling party prefixes based on number type. In addition. The gateway can be added either as an H. The gateway can be added either as an H.

0014085551234 with the Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: +1 Get Latest & Actual 300-075 Exam's Question and Answers from exam. The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U. is 9 and 001 for international calls to the U. The PSTN access code for the U. To match the US-TEHO pattern \+!. Calling number localization is done by configuring a calling party transformation CSS at the phone. Calling number localization is done using route patterns. Answer: C QUESTION 197 Refer to the exhibit. Calling number localization is done by configuring the phone directory number in a localized format.exam. how should the translation pattern be configured? A. D.K.S. Calling number localization is done using translation patterns.QUESTION 196 Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in a local format? A. C. area code 408 from the U.com 100 .K.S. http://www. 9001. 9. B. Calling number localization is done by configuring a calling party transformation CSS at the gateway.4085551234 with the Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: + B. E.

signifies the international access code in a complete E. First route group should be only the local route group. gateway. area code 408 from the U. The second route group should point to the U.exam. B.com 101 . gateway. The TEHO-US route list should contain only the local route group. The second route group should be the local route group. International call code is 001.S.S.K. The second route group should point to the U. Get Latest & Actual 300-075 Exam's Question and Answers from exam.S. The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.K. http://www. D. 001. The international escape character. gateway. C.C. The globalized configuration means that the appropriate gateway will be selected automatically.S.164 number format. gateway.K.14085551234 with the Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: +1 D. 900. QUESTION 198 Refer to the exhibit. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of? A.14085551234 with the Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: + E. +. First route group should point only to the U. The PSTN access code for the U. First route group should point only to the U. 900.4085551234 with the Called Party Transformation: Prefix Digits Outgoing Calls: + Answer: D Explanation: The PSTN access code for the UK is 9.

Answer: C Explanation: The route group points to one or more gateways and can choose the gateways for call routing based on preference.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: 1 D. \+.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: None E. \+1408. QUESTION 199 Refer to the exhibit.K. \+1. The \+! route pattern should point directly to the U. One or more route lists can point to the same route group.S.E.408! with the following Called Party Transformation: Get Latest & Actual 300-075 Exam's Question and Answers from exam.K. is 9 and 001 for international calls to the U. \+1. The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U. \+408. What should the Called Party Transformation Pattern at the U. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. The PSTN access code for the U. gateway.S.S.com 102 .S. gateway be configured as? A.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: None C. http://www. Assuming the PSTN does not accept globalized numbers with + prefix.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: + B. area code 408 from the U.exam.

The long distance national code for PSTN dialing is 1. C. The HQ site uses area code 650. The long distance national code for PSTN dialing is 1.Discard Digits PreDot Prefix Digits Outgoing Calls: None Answer: D QUESTION 200 Refer to the exhibit. followed by 1. The BR1 site uses area code 408. E. D.exam. B. AAR must use globalized call routing using a single route pattern. To make a long distance national call. 9 91 none + +1 Answer: C QUESTION 201 Refer to the exhibit. http://www. an HQ or BR1 user dials access code 9. To make a long distance national call. and then the 10-digit number. The HQ site uses area code 650. an HQ or BR1 Get Latest & Actual 300-075 Exam's Question and Answers from exam. Both sites use MGCP gateways. The BR1 site uses area code 408. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. What should the AAR group prefix be? A.com 103 .

AAR CSS must contain translation pattern 9. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. http://www. AAR must use globalized call routing using a single route pattern.exam. Both sites use MGCP gateways.1[2-9]XX[2-9]XXXXXX for each site that must be globalized. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. The BR1 AAR CSS must include a partition assigned to route pattern 91650XXXXXXX. followed by 1. an HQ or BR1 user dials access code 9. and then the 10-digit number. Otherwise the called numbers will not be localized at the egress gateway. The HQ site uses area code 650. How many route lists and route groups should be configured for AAR at a minimum? Get Latest & Actual 300-075 Exam's Question and Answers from exam. and then the 10-digit number. AAR must use globalized call routing using a single route pattern. PSTN partition B. followed by 1. The long distance national code for PSTN dialing is 1. Which partition should be configured in the AAR CSS applied at the phones? A. To make a long distance national call. D.com 104 . The HQ AAR CSS must include a partition assigned to route pattern 91408XXXXXXX. Both sites use MGCP gateways. LD partition C. The BR1 site uses area code 408.user dials access code 9. Answer: A QUESTION 202 Refer to the exhibit.

K. Answer: A QUESTION 203 Assume a centralized Cisco Unified Communications deployment with the headquarters in the U. Local route groups have been configured on the U. Which statement about the emergency call is true? Get Latest & Actual 300-075 Exam's Question and Answers from exam.K. http://www. a single route list with a local route group for each site two route lists and two route groups for each site a single route list and four route groups for each sitea None. and remote site in RTP.com 105 . user logs onto an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000.A.K and RTP device pools. B. D.exam. All route patterns are assigned a route list that points to the local route group. C. A U. The AAR CSS can point directly to the route pattern.

The call will fail.K_Emergency route pattern partition and will egress at the RTP gateway.A. The call will match the U. gateway. gateway.exam. D.K_Emergency route pattern partition and will egress at the U. E. http://www.com 106 .K. Answer: A QUESTION 204 Refer to the following exhibit. C. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. The MGCP gateway has the following configurations: Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway. The call will match the U.

Pt) call.ng party transformation CSS HQ_clng_pty CSS (partition=HQ_clng_pty Pt) All translation patterns have the check box "Use Calling Party's External Phone Number Mask" enabled.called party transformation CSS HQ_cld_pty CSS (partition=HQ cld_pty. When the IP phone at extension 3001 places a call to 9011 49403021 56001# what is the Get Latest & Actual 300-075 Exam's Question and Answers from exam.com 107 .exam. http://www.

D. external phone number to be used for calling line identification (CLID) on outgoing calls. The called number is +49403021 56001 with number type set to international.com 108 . The called number is 01 1 49403021 56001. QUESTION 205 Refer to the exhibit When the Cisco Unified Communications Manager advertises the Hosted DN Pattern. The called number is 011 49403021 56001. The calling number will be 5553001 and number type set to subscriber. C. C. The calling number will be 5215553001 and number type set to national. Answer: A Explanation: Check the check box "Use Calling Party's External Phone Number Mask" if you want the full. D. B. The calling number will be 5215553001 and number type set to subscriber. B. http://www. which pattern would be advertised? A. 2XXX and the T0D1D will be 0:+498950555 2XXX and the ToDID will be 0:+4989531 21 4989S05552XXX and the ToDiD will be 0: + 4989631 21 2XXX and the ToDiD will be 0: Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0: Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. The calling number will be 5215553001 and number type set to national. The called number is 4940302156001 with number type set to international.exam.resulting called and calling number that is sent to the PSTN? A. You may also configure an External Phone Number Mask on all phone devices. E.

H. D. they would like 10 digits sent. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI. B.exam.225 SIP Intercluster MGCP FXO trunk MGCP T1/E1 trunk Answer: B QUESTION 208 Which E.X Answer: A QUESTION 209 Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two. In the directory number configurations. For domestic calls. and the international escape character +. How can this be accomplished? A. In the external call route patterns.com 109 . This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls. for international calls. they would like the ANI that is sent to the PSTN to be the main number. B. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns. the wildcard characters X. F. B. and octothorpe (#). set the external phone number mask to the main number.164 transformation pattern represents phone numbers in Germany? A. they would like to send the country code 1 and the 10 digits.! \+49. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.! 49. C. not the extension. Use a calling party transform mask for each route group in the corresponding route list configuration. set the prefix digits field to the country code and the 10 digits of the main number. D.! \49. D. C.323 H. E. http://www.323 gatekeeper-controlled network? A. QUESTION 207 Which trunk should you use in an H. C.) Get Latest & Actual 300-075 Exam's Question and Answers from exam.QUESTION 206 When an external call is placed from Ajax. Answer: C Explanation: calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9. asterisk (*). \+49.

Called-party numbers are routed from the gateway or trunks to phones. Prefix the appropriate site code for the calling number. http://www. Assume that the HQ phones have access to the HQ partition.A. Configure a route pattern 8222. Use a CSS that contains the partitions for BR phones. and assign it to partition HQ. Calling-party calls are routed to the gateway and trunks.com 110 .12].[1-32]XXX. configure the called party DDI of Predot. Answer: AD QUESTION 210 Refer to the exhibit.[12]XXX for site HQ.12. D. Configure a translation pattern 8222.[12]XXX for site HQ. Use the local gateway at each site. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site? A. C. B. Prefix the appropriate site code for the calling number.exam. Use a CSS that contains the partitions for HQ phones. Get Latest & Actual 300-075 Exam's Question and Answers from exam. and assign it to partition BR. C. Configure a translation pattern 8111. Configure a single route pattern for both sites 8[12. Calling-party numbers of internal calls are routed from the gateway or trunks. and assign it to partition BR.[1-3]XXX. Configure a route pattern for site BR 8111.[12]XXX for site HQ. Calling-party numbers are routed from the gateway or trunks to phones. Use a route list that contains the local route group for each site. Configure called party DDI Predot. For both translation patterns. D. Use a CSS that contains the partitions for HQ phones.[1-3]XXX for site BR. Configure the called party DDI of Predot. and assign it to partition BR. B. Prefix the appropriate site code for the calling number. and assign it to partition HQ. and BR phones have access to the BR partition. Configure a translation pattern 8222.

how does the calling number get normalized to a global E.323 gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway.exam.[1-3]XXX for site BR. An MGCP gateway can be added in Cisco Unified Communications Manager under the Gateway Type field using the gateway model. Answer: B QUESTION 212 What is the difference between an MGCP gateway and a SIP gateway? A.Configure a translation pattern 8111. An MGCP gateway that dial peers be configured before PSTN calls can be placed and received.323 gateway can be added in Cisco Unified Communications Manager under gateway type as H. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk. The SIP gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk.323 gateway. C. D. and assign it to partition HQ. Get Latest & Actual 300-075 Exam's Question and Answers from exam. The SIP gateway requires no dial peers. D. A SIP gateway requires a call agent for PSTN calls to be placed and received. E. An MGCP gateway can register with Cisco Unified Communications Manager. B. An H. The H. For both translation patterns. The SIP gateway requires no dial peers. configure the called party DDI of Predot.323 gateway can register with Cisco Unified Communications Manager.323 gateway and a SIP gateway? A. An H. An MGCP gateway does not require a call agent for PSTN calls to be placed and received. B.323 Gateway.164 number with + prefix in Cisco Unified Communications Manager? A.323 gateway requires that dial peers be configured before PSTN calls can be placed and received. E. The SIP gateway must be configured in Cisco Unified Communications Manager using the domain name. An H.com 111 . Use a CSS that contains the partitions for BR phones. A SIP gateway will show status of "Unknown". Prefix the appropriate site code for the calling number. http://www. C. The H. A SIP gateway requires a call agent for PSTN calls to be placed and received. A SIP gateway will show status of "Unknown". Answer: C QUESTION 211 What is the difference between an H.323 gateway does not require a call agent for PSTN calls to be placed and received. Answer: B QUESTION 213 When an incoming PSTN call arrives at an H. Normalization is done using translation patterns. The MGCP gateway must be configured in Cisco Unified Communications Manager using the domain name.

which configuration should be implemented? A. For the HQ phones always to use the hardware conference bridge as a first choice. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Normalization is achieved by local route group that is assigned to the H. Normalization is done using route patterns. D. how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager? A. http://www. Normalization is done using the gateway incoming calling party prefixes based on number type. All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL.exam.323 gateway. C.com 112 .B. Normalization is achieved by local route group that is assigned to the H.323 gateway. Normalization is done using the gateway incoming called party prefixes based on number type. D. Answer: D QUESTION 214 When an incoming PSTN call arrives at an H. B. Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. Normalization is done by configuring the significant digits for inbound calls on the H.323 gateway configuration in Cisco Unified Communications Manager. Normalization is done using route patterns. E. Normalization is done using the gateway incoming calling party prefixes based on number type.323 gateway. Answer: A QUESTION 215 Refer to the exhibit.

The transcoder should be assigned to its own MRG. BR_MRGL is assigned to the BR IP phones. Assign the hardware conference bridge to HQ_MRG. B.exam.Ensure that the instance ID for the hardware conference bridge is 0. B. The HQ_MRGL_2 should be assigned to the HQ device pool. HQ_MRGL is assigned to the HQ IP phones. Configure a second HQ_MRG_2 and assign the software conference bridge to it. which should then be assigned to the default device pool. Where should the transcoder reside? A. Answer: C QUESTION 216 Refer to the exhibit.711 codec. The HQ phones will automatically change over to the G. The transcoder should reside at the BR site and assigned to BR_MRG. Add HQ_MRG_2 to HQ_MRGL_2. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first.com 113 . The transcoder should reside at the HQ site and assigned to HQ_MRG. Add the HQ_MRG to HQ_MRGL. The hardware conference bridge must be configured first. A transcoder is not needed. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. C. D. The HQ_MRGL should be assigned to the HQ phones. C.711 codec. Get Latest & Actual 300-075 Exam's Question and Answers from exam. Configure a second HQ_MRG_2 and assign the software conference bridge to it. The remote site BR IP phones support only the G. Assign the hardware conference bridge to HQ_MRG. D. Configure an additional HQ_MRGL_2. http://www.

The BR1 site uses area code 408.Answer: B QUESTION 217 When configuring intercluster URI dialing. followed by 1. an engineer gets the error message "Local cluster cannot connect to the ILS network". an HQ or BR1 user dials access code 9. To make a long distance national call. Which statement is true? Get Latest & Actual 300-075 Exam's Question and Answers from exam. The HQ site uses area code 650. C.) A. and the other is using Password. Both sites use MGCP gateways. F. and then the 10-digit number. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.exam. The cluster ID does not match. One cluster is using TLS certificate. The ILS authentication password does not match. AAR must use globalized call routing using a single route pattern. The Tomcat certificates do not match. Answer: BDF QUESTION 218 Refer to the exhibit. Which three reasons for this error are true? (Choose three. The long distance national code for PSTN dialing is 1. http://www. The SIP route patterns have not been properly configured. The Cisco Unified Resource Identifier service needs a restart.com 114 . D. B. E.

A. Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? A. B. The AAR group system must be configured on the line configuration of the phones. D. The single AAR group system cannot be used. the autonomous-system number specified in the service-family ipv4 autonomous-system command C. The AAR group system must be configured under the AAR service parameters. http://www. A second AAR group must be configured in order to have source and destination AAR groups. the sf-interface configuration D. C. the label name specified in the router eigrp command B. The AAR group system must be configured on the device configuration of the phones. the label name specified in the router eigrp command and the autonomous-system number Answer: B QUESTION 220 Refer to the exhibit.exam. Answer: B QUESTION 219 Refer to the exhibit. What should the destination IP address be configured as on the HQ and BR1 SIP trunks? Get Latest & Actual 300-075 Exam's Question and Answers from exam. the topology base configurations E.com 115 .

6.5. C. QUESTION 221 Refer to the exhibit. What must be configured on the HQ Cisco Unified Communications Manager to allow HQ users to dial the SAF learned directory number pattern 3XXX? Get Latest & Actual 300-075 Exam's Question and Answers from exam.1. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves.com 116 .10. D.10. http://www.1. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. The destination IP address is not configurable. B.exam. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address.A. Answer: B Explanation: The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. The BR1 SIP trunk destination IP address should be 10. Each cluster will learn about the remote trunk IP address through SAF learned routes. The HQ SIP trunk destination IP address should be 10.

Answer: C Explanation: By adopting the SAF network service.com 117 . http://www. B.A. E. D. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone AAR CSS. Which CSS is used at the HQ Cisco Unified Communications Manager to reroute calls via the PSTN when the SAF network is unavailable? Get Latest & Actual 300-075 Exam's Question and Answers from exam. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone CSS. the call control discovery feature allows Cisco Unified Communications Manager to advertise itself along with other key attributes. The SAF directory number pattern 3XXX will be made available to all users automatically as soon as the SAF partition is selected. Route pattern 3XXX should be configured and made available to HQ users through the phone CSS. Route pattern 3XXX should be configured and made available to HQ phone users through the phone AAR CSS.exam. C. QUESTION 222 Refer to the exhibit.

the phone device CSS the phone line CSS the phone line/device combined CSS the SAF CSS configured on the CCD requesting service the phone AAR CSS configured at the phone device No special CSS is required. C. If SAF patterns are accessible. How does the Cisco Unified Communications Manager advertise dn-block 1? Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. D.A. E.com 118 .exam. Answer: E QUESTION 223 Refer to the exhibit. http://www. F. the PSTN reroute is automatic.

D.A. 4XXX and the ToDID will 0: 4XXX and the ToDID will 0:1972555 4XXX 4XXX and the ToDID will 0:+ 1972555 19725554XXX Answer: B QUESTION 224 Refer to the exhibit. E. B. How does the Cisco Unified Communications Manager advertise dn-block 2? Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www. C.com 119 .exam.

com 120 .A. D. Which Cisco IOS SAF Forwarder configuration is correct? Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.exam. 14087071222 with number type international +14087071222 with number type international +14087071222 14087071222 Answer: C QUESTION 225 Refer to the following exhibit. B. C.

exam.com 121 .Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.

D.A.com 122 . Exhibit A Exhibit B Exhibit C Exhibit D Answer: A QUESTION 226 Refer to the exhibit. E. When the Manager places a call to 3001 when the SAF network is down. D. B. C. http://www. B. The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified Communications Manager. C. QUESTION 227 Refer to the exhibit.exam. The call fails. the SAF forwarder withdraws those learned patterns that were published by the call control entity. and the calls gets routed through the PSTN gateway. Get Latest & Actual 300-075 Exam's Question and Answers from exam. In this case. The call is rerouted to the PSTN with the constructed PSTN number as +442288223001 The call is rerouted to the PSTN with the constructed PSTN number as 442288223001 The call is rerouted to the PSTN with the constructed PSTN number as 0002288223001 The call is rerouted to the PSTN with the constructed PSTN number as +0002288223001 Answer: A Explanation: When the SAF forwarder loses network connection with its call-control entity. what happens? A. CCD requesting service marks those learned patterns as unreachable via IP.

router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit.com 123 .exam. http://www. router eigrp SAF i service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family voice service saf profile trunkroute 1 session protocol sip interface Loopback1 transport tcp port 5060 ! B.service-family ! voice service saf profile trunk-route 1 session protocol sip interface Loopback1 transport tcp port 5060 ! profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx ! profile callcontrol 1 dn-service trunk-route 1 dn-block 1 dn-block 2 ! channel 1 vrouter SAF asystem 1 Get Latest & Actual 300-075 Exam's Question and Answers from exam.Which minimum configuration for a Cisco Unified Communications Manager Express SAF Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder? A.

B. E.com 124 . D. None of above configurations contain sufficient information. C. Answer: C QUESTION 228 Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes? A. F. B. Which three characters should you avoid entering in the description? (Choose three. create VPN groups create VPN profiles create a new Service Advertisement Framework security profile set feature configuration parameters of Call Control Discovery configure Service Advertisement Framework forwarder information enable enterprise parameter for Service Advertisement Framework forwarder Answer: CE QUESTION 230 You are entering the description for the Service Advertisement Framework forwarder. show eigrp address-family ipv4 saf show voice saf routes show voice saf detail show eigrp service-family ipv4 saf show voice saf dndb all Answer: E Explanation: Router# show voice saf dnDb all Total no. http://www. router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family ! D. D.) A.) Get Latest & Actual 300-075 Exam's Question and Answers from exam. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0 Last successful DB update @ 2009:12:14 15:42:45:967 QUESTION 229 What are the two tasks that you must perform to configure the Service Advertisement Framework forwarder in Cisco Unified Communications Manager? (Choose two. C.subscribe callcontrol wildcarded publish callcontrol 1 ! C. E.exam.

The Service Advertisement Framework forwarder contacts all the remaining Service Advertisement Framework forwarders in the cluster. B. router eigrp SAF ! Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. D.exam. C. <> & % # $ @ Answer: ABC QUESTION 231 In a cluster-wide deployment. Calls are routed to the PSTN gateway after the Call Control Discovery Learned Pattern IP Reachable Duration parameter expires. C. D. F. All learned patterns are purged from the local cache after the Call Control Discovery PSTN Failover Duration parameter expires. F. E. Call Control Discovery immediately redirects all the calls to the PSTN gateway based on the learned patterns. E. B. Answer: AB QUESTION 233 Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder? A. http://www. All the remaining Service Advertisement Framework forwarders are notified for their learned patterns.A.) A. The Cisco Unified Communications Manager establishes a connection with the primary and secondary Service Advertisement Framework after the Learned Pattern IP Reachable Duration parameter expires.com 125 . 1 2 3 4 6 as many as are configured Answer: B QUESTION 232 Which two actions are performed by the Call Control Discovery service after the local Cisco Unified Communications Manager loses its TCP connection with the primary and secondary Service Advertisement Framework? (Choose two. F. what is the maximum number of Service Advertisement Framework forwarders to which the Cisco Unified Communications Manager can connect? A. B. D. E.

http://www. router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family ! voice service saf profile trunk-route 1 session protocol sip interface Loopbackl transport tcp port 5060 ! profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx ! profile callcontrol 1 dn-service trunk-route 1 dn-block 1 dn-block 2 i C.service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family ! voice service saf profile trunk-route 1 session protocol sip interface Loopbackl transport tcp port 5060 i B. router eigrp SAF ! Get Latest & Actual 300-075 Exam's Question and Answers from exam. router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family ! voice service saf profile trunk-route 1 session protocol sip interface Loopbackl transport tcp port 5060 ! profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx ! profile callcontrol 1 dn-service trunk-route 1 dn-block 1 dn-block 2 ! channel 1 vrouter SAF asystem 1 subscribe callcontrol wildcarded publish callcontrol 1 i D.com 126 .exam.

Answer: B QUESTION 235 What is the purpose of a SAF Client? A. When a user presses a speed dial to +442079460255 when the SAF network is down. To decode address information and route calls to and from the end points To pass IP information from the CUCM to the endpoint To learn about and advertise or subscribe information about SAF network services To reside in the Cisco IOS software. The call will reroute via the PSTN with the constructed PSTN number as +442079460255. D. D.com 127 . and to communicate with the SAF forwarder Answer: C QUESTION 236 Which two options for a Device Mobility-enabled IP phone are true? (Choose two. The call will fail because the called number will be 2079460255. The call will reroute via the PSTN with the constructed PSTN number as 442079460255. C.service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family ! voice service saf ! channel 1 vrouter SAF asystem 1 E. E. The call will fail because the ToDID is 0:. The call will reroute via the PSTN with the constructed PSTN number as 00442079460255.) Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. http://www.exam. which event should occur? A. router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family i Answer: A QUESTION 234 Refer to the exhibit. B. C.

The login will fail because only a single Cisco Extension Mobility profile is allowed. the roaming) device pool are applied. The audio source that is configured in the IP Voice Media Streaming parameters is selected. Answer: BD QUESTION 237 When Cisco Extension Mobility is implemented. The user may login to both profiles in any order. The audio source that is configured at the user device profile is selected. E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled. Answer: B Explanation: Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco Unified IP Phone and then entering login information in the form of a Cisco Unified Communications Manager UserID and a Personal Identification Number (PIN). The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected. QUESTION 239 When Cisco Extension Mobility is implemented. which CSS is used for calling privileges? A. the Device Mobility-related settings are also applied. The user must login to both profiles in the order they are presented. If the DMGs are the same. Only the user device profile device CSS is used. D. Answer: A QUESTION 238 When multiple Cisco Extension Mobility profiles exist. how is the audio source for the MOH selected? A. C. E. B. The phone configuration is not modified. C. The user must select the desired profile. D. If a user has more than one user device profile.A. The roaming-sensitive parameters of the current (that is. The combined line/device CSS of the physical phone is used to log in the extension mobility user. The audio source that is configured at the home phone of the user is selected. D. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool. The combined line/device CSS of the user device profile. C. Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. a prompt displays on the phone and asks the user to choose a device profile for use with Cisco Extension Mobility. http://www. which actions take place when a user tries to log in to Cisco Extension Mobility? A.com 128 . The user device profile line CSS combined with the device CSS of the physical phone used to log in the extension mobility user. B. D. C.exam. B. The user device profile device CSS combined with the line CSS of the physical phone used to log in the extension mobility user.

com 129 . choose an audio source from the User Hold MOH Audio Source drop-down list box from device profile configuration settings. E. by using a third-party automatic provisioning tool to verify user ID by broadcasting a request to all clusters to verify the user type from user IDs that are created by default when the user logs in by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks Get Latest & Actual 300-075 Exam's Question and Answers from exam. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. QUESTION 241 You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call processing environment. QUESTION 240 Refer to the exhibit. B. With the Mobile Connect feature configured. D. B. C. C. D. when the PSTN phone calls the Enterprise user at extension 3001. how does the visiting cluster determine if the user is a local user or a remote user? A. the Enterprise user's mobile phone does not ring. During the initial extension mobility login request.exam.Explanation: To specify the audio source that plays when a user initiates a hold action. the gateway CSS the Phone Device CSS the Remote Destination Profile CSS the Remote Destination Profile Rerouting CSS the Phone Line (DN)CSS Answer: D Explanation: Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone? A. http://www.

B. C. C. D. The phone immediately logs the user off. when a user logs in to a phone type which has no user device profile. E. by verifying against the local database F. upgrade the firmware of the IP Phone to the latest version activate EM feature service under Cisco Unified Serviceability associate EM Device profile with the end-user subscribe the MAC address of the IP Phone to EM Service update EM Phone Service URL to point to the publisher subscribe device profile to EM phone service in case the enterprise subscription of EM Service is disabled Answer: BCD QUESTION 245 Refer to the exhibit. Answer: A QUESTION 244 In a Centralized Call processing architecture. D. you have deployed Extension Mobility (EM) feature. B.) A.) A.exam. B. The phone creates a new device profile automatically. After the deployment of EM. C. when one of the end-users tries to login to the IP phone. What three things should you do to resolve this issue? (Choose three. F. countries regions directory numbers transcoders Answer: AB QUESTION 243 With Cisco Extension Mobility. the Error 25 is displayed on the screen.com 130 . When a call between two HQ users is being conferenced with a remote user at BR. what will happen to the phone? A. The phone takes on the default clusterwide device profile. which configuration is needed? Get Latest & Actual 300-075 Exam's Question and Answers from exam. by verifying the visiting Trivial File Transfer Protocol Answer: E QUESTION 242 Which two entities could be represented by device mobility groups? (Choose two. The phone crashes and reboots.E. http://www. D.

which configuration should be implemented? Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam.729 codecs in Cisco Unified Communications Manager Service Parameters.711 and G. The HQ_MRGL must be assigned to the HQ phones. All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. http://www. The BR_MRGL must be assigned to the BR phones.A. Enable the software conference bridge to support the G. E. The HQ_MRG must contain the transcoder device. For the HQ phones always to use the hardware conference bridge as a first choice. The HQ_MRGL must be assigned to the software conference bridge. The HQ_MRG must contain the transcoder device. C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL.com 131 . B. D. Answer: D QUESTION 246 Refer to the exhibit. The BR_MRG must contain the transcoder device.

B. Assign the hardware conference bridge to HQ_MRG. D. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Ensure that the instance ID for the hardware conference bridge is 0.. http://www.729 codec. Configure an additional HQ_MRGL_2. Answer: C Explanation: To ensure that the hardware bridge is utilized first with all its resources BEFORE the software bridge is used .exam.com 132 . Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Assign the hardware conference bridge to HQ_MRG..A. Add HQ_MRG_2 to HQ_MRGL_2. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. you need to have two separate MRG's and list the hardware MRG 1st in the MRGL . The HQ_MRGL should be assigned to the HQ phones. Add the HQ_MRG to HQ_MRGL. The HQ_MRGL_2 should be assigned to the HQ device pool.. how many calls are allowed for the BR location? Get Latest & Actual 300-075 Exam's Question and Answers from exam. Assuming the regions configuration to BR only permits G.. Configure a second HQ_MRG_2 and assign the software conference bridge to it. The hardware conference bridge must be configured first. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. QUESTION 247 Refer to the exhibit. C.

Cisco Unified Communications Manager assumes that each G. Total of four calls. Two outgoing calls. http://www.exam. two incoming and two outgoing. How many calls are permitted by the RSVP configuration? Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. D. QUESTION 248 Refer to the exhibit. Outgoing calls are not impacted by the location configuration. Answer: D Explanation: In performing location bandwidth calculations for purposes of call admission control. Total of four calls in either direction. E.A. Total of two calls in either direction. Total of four calls to the BR location. C.com 133 .729 call stream consumes 24 kb/s amount of bandwidth. Incoming calls are unlimited.

exam.711 call eight G. RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP.711 call two G. E. B. http://www.729 calls one G. E.729 calls. To permit three G.729 calls Answer: B QUESTION 249 Refer to the exhibit. what should the bandwidth value be for the ip rsvp bandwidth command? A. C. When a call is placed from the IP phone at HQ to the BR phone at the BR site. one G.com 134 .A. which statement is true? Get Latest & Actual 300-075 Exam's Question and Answers from exam. The BR Cisco Unified Communications Manager has been configured for local RSVP. C. 32 48 64 88 128 Answer: D QUESTION 250 Refer to the exhibit.729 calls four G.729 call and one G. D. D. The HQ Cisco Unified Communications Manager has been configured for end-to-end RSVP. B.

The BR Cisco Unified Communications Manager will use local RSVP.A. C. QUESTION 251 Refer to the exhibit. The call will fail. No RSVP end-to-end will occur. RSVP end-to-end will occur. Answer: D Explanation: A possible cause is that the same router is being used as the calling and called RSVP agents. and that router is not running the latest IOS version. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP. which supports loopback on RSVP reservation. Make sure that the router is running the latest IOS version. The call will proceed as a normal call with no RSVP reservation. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. http://www.com 135 .exam. Which statement about the configuration between the Default and BR regions is true? Get Latest & Actual 300-075 Exam's Question and Answers from exam. D. E. B.

the G. Calls between the two regions can use either 64 kbps or 8 kbps. Calls between the two regions can use only the G.323 Gatekeeper Call Admission Control is true? A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications deployments that use locations based Call Admission Control. In this design. Answer: B Explanation: in distributed call processing deployments on a simple hub-and-spoke topology. the call processing agent (which could be a Unified CM cluster. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications Express deployments. QUESTION 253 Refer to the exhibit. D. B. C.729 codec. Answer: B QUESTION 252 Which statement about H.exam. Cisco Unified Communications Manager Express (Unified CME).711 codec will be used. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications Manager. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications deployments. How many calls can be placed to Cluster B? Get Latest & Actual 300-075 Exam's Question and Answers from exam.323 gateway) registers with the Cisco IOS gatekeeper and queries it each time the agent wants to place an IP WAN call. Both codecs can be used depending on the loss statistics of the link.A. D. When lossy conditions are high. C. B. you can implement call admission control with a Cisco IOS gatekeeper. or an H. Only 64 kbps will be used between the two regions because the link is "lossy". http://www.com 136 .

C.A.729 calls one G. The associate profile and dsp farm profile numbers need to match associate ccm 2 command. When you review the configurations in both devices the IP addresses and transcoder names are correct. The sccp ccm group number needs to match the associate ccm 2 command.729 calls.1. B. C.com 137 . The sccp ccm group number must match the voice-card number. You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager.1 command. but the transcoder is failing to register with the Cisco Unified Communications Manager. D. http://www. Answer: A QUESTION 254 Refer to the exhibit.711 and three G.exam.729 calls There is no limit for incoming calls to Cluster B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10. Which command needs to be edited to allow the transcoder to register properly? A.711 call one G. Outgoing calls are limited to one G. three G. D.1.711 and three G. E. Answer: B Get Latest & Actual 300-075 Exam's Question and Answers from exam. The maximum sessions command must match the number of codecs configured under the dsp farm profile. B.

D. C.com 138 . the caller does not need to hang up and redial the called party. D. A user in RTP calls a phone in San Jose during congestion with Call Forward No Bandwidth (CFNB) configured to reach cell phone 4085550150. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP. Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth. QUESTION 256 Which statement is correct about AAR? A. which two types of Call Admission Control can be implemented? (Choose two. The user in RTP sees the message "Not Enough Bandwidth" on their phone and hears a fast busy tone. Answer: A Explanation: Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. QUESTION 255 If your IP telephony administrator asks you to configure a local zone for your dial plan to control the volume of calls between two end points in a centralized multisite environment.) A. The end users sees. B. "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention.) Get Latest & Actual 300-075 Exam's Question and Answers from exam. QUESTION 257 Refer to the exhibit.Explanation: The value of the IP address should match the IP address in the ip source-address command. Which two conditions can correct this issue? (Choose two. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call. B.exam. C. With automated alternate routing. E. http://www. locations based automated alternate routing gatekeeper based SRST Cisco Unified Communications Manager based Answer: AB Explanation: Location-based call admission control (CAC) manages WAN link bandwidth in Cisco Unified Communications Manager.

RSVP supports audio.exam. D. video. You have an available dedicated bandwidth of 20% from the 2-Mb/s Get Latest & Actual 300-075 Exam's Question and Answers from exam. The called phone (San Jose) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings. D.) A. QUESTION 258 Which two statements describe RSVP-enabled locations-based CAC? (Choose two. B. Answer: BF Explanation: Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. RSVP and RTP are used between the two endpoints. E. RSVP is topology aware. The called phone (San Jose) needs to have AAR Group value of AAR under the AAR Settings. F. but only works with full mesh networks. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices QUESTION 259 You are deploying a remote office setup that connects with Cisco Unity Communications Manager at a hub location. The calling phone (RTP) needs to have AAR Group value of AAR under the AAR Settings. RSVP can be enabled selectively between pairs of locations.com 139 . E. The calling phone (RTP) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings. Using RSVP for CAC simply allows admitting or denying calls based on a logical configuration that is ignoring the physical topology. With automated alternate routing. The called phone (San Jose) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings.A. C. C. Answer: AD Explanation: The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. and data pass-through. The calling phone (RTP) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings. http://www. An RSVP agent is a Media Termination Point that the call has to flow through. the caller does not need to hang up and redial the called party. B.

D. C. E. Cisco Unified Communications Manager sends TOH rather than MOH. B.exam. C. C. Cisco Unified Communications Manager attempts to reconnect the call immediately.WAN circuit for VoIP that supports a maximum of 17 calls. http://www. E. G.711 G. D. B. what is the best CAC method recommended for this type of deployment? Get Latest & Actual 300-075 Exam's Question and Answers from exam. D. RSVP is topology aware. Cisco Unified Communications Manager terminates the call. D. Cisco Unified Communications Manager plays default MOH. F. Answer: A QUESTION 262 On which Cisco Unified Communications Manager configuration parameter does the CODEC that a Cisco IP Phone uses for a call depend? A. RSVP enables AAR within Cisco Unified Communications Manager.com 140 .722 G. B. B. Answer: C QUESTION 261 What happens if location-based CAC is used and there is no bandwidth available when a remote caller is placed on hold? A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager. RSVP is configured in Cisco Unified Communications Manager independent of the ISR. Which codec do you configure in Cisco Unity Communications Manager to achieve this? A.729 iSAC GSM-FR iLBC Answer: C QUESTION 260 How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations? A. C. enterprise parameters media resources physical location region location Answer: D QUESTION 263 In a Cisco Unified Communications Manager centralized call processing model.

to enable transcoding resources in a Cisco Unified Communications Manager server B. Cisco IOS software registers transcoder resources with SCCP. http://www. B. E. D. QoS-based location-based RSVP-based region-based gateway-based gatekeeper-based Answer: B QUESTION 264 Which action configures phones in site A to use G. B. to enable transcoding resources in Cisco IP Phones Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. C.A. Configure transcoder resources in Cisco Unified Communications Manager.com 141 .729 to site C? A. Cisco IOS software does not register transcoder resources. Configure Cisco Unified Communications Manager regions.711 to site B but to use G. Cisco IOS software registers transcoder resources with H. modify the service parameter modify the enterprise parameter modify the device pool modify the line settings Answer: AB QUESTION 266 Which action configures the registration of transcoder resources? A. to enable Cisco Unified Communications Manager to select the optimal single codec for end-toend calls C. B. Cisco IOS software registers transcoder resources with SIP.323. F. C. D. Answer: B QUESTION 267 Which option describes the reason that transcoding resources are added in Cisco Unified Communications Manager? A. which two are ways to prevent G. C.) A. Answer: A QUESTION 265 When you configure regions in a Cisco Unified Communications Manager multisite cluster. Configure a gatekeeper. D.722 from being advertised in the cluster? (Choose two. C. D. Configure Cisco Unified Communications Manager locations.exam.

C. D. Configure the branch office IP phones with CSS and partitions. Configure Cisco Unified Communications Manager regions. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server C. to allow for supplementary services such as hold. Configure the branch office IP phones with regions. B. Configure Cisco Unified Communications Manager locations. transfer. Configure Cisco Unified Communications Manager MTPs. B. Configure a gatekeeper and a gatekeeper-controlled trunk in Cisco Unified Communications Manager with bandwidth control. Answer: BD QUESTION 271 Which action configures CAC utilizing only Cisco Unified Communications Manager software? A. http://www. Configure Cisco Unified Communications Manager regions. B. Configure Cisco Unified Communications Manager locations. and conferencing B. Answer: B Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam. C. Configure the branch office IP phones with locations. D. Configure Cisco Unified Communications Manager RSVP-enabled locations.com 142 . to provide transcoding resources in Cisco IOS gateways to Cisco Unified Communications Manager Answer: D QUESTION 268 Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones? A. Answer: B QUESTION 269 What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager? A. Configure the branch office IP phones with MRGs and MRGLs. D. Configure a gatekeeper with an SIP trunk.D.) A. C. when you need the ability to grow support by using DSPs D. when you want to only use Cisco Unified Communications Manager resources Answer: C QUESTION 270 Which two options are effective mechanisms to restrict the maximum number of voice calls on a WAN link? (Choose two.

722 8 kb/s for G. If both configurations exist. D. Answer: B Get Latest & Actual 300-075 Exam's Question and Answers from exam.711. Regions can be assigned either directly on the device configuration page or through the device pool. and 64 kb/s for G.729.711. C. Answer: E QUESTION 275 How is the region assigned to a device such as an IP phone? A. Clustering must be implemented over the WAN. Answer: D QUESTION 274 What is a prerequisite of AAR deployment? A.com 143 . 8 kb/s for G. D. Regions are assigned directly in the device configuration page. Configure Cisco IP Phones for AAR. B. and 64 kb/s for G. Configure AAR to work with CTI route points. B. If both configurations exist. C. and 8 kb/s for G. E. D. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. the device pool region configuration takes precedence. http://www. 64 kb/s for G.729.729.QUESTION 272 Which bandwidth amounts are correct for configuring locations? A.711. the device region configuration takes precedence. Regions can be assigned either directly on the device configuration page or through the device pool. 64 kb/s for G. You must have a single distributed call processing deployment.722 Answer: A QUESTION 273 Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN? A. B. 64 kb/s for G. D.729. You must have a centralized call processing deployment.711. and 16 kb/s for G.722 64 kb/s for G. 8 kb/s for G.exam.722 8 kb/s for G. C. Configure AAR to work with SRST. Regions can be assigned only through a device pool. This configuration is not possible using AAR. C. B. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.

No adjustment to location setting is needed Mark the bandwidth between the locations as unlimited Decrease the audio bandwidth setting Remove the audio bandwidth setting Answer: C QUESTION 277 Cisco Unified border element is configured to support RSVP-based CAC. D. C. D. B. F.QUESTION 276 How can the location setting be modified to resolve poor call quality? A. The VCS Control must be deployed together with VCS Expressway before endpoints can register to either one.245 capabilities negotiation is completed. Answer: C QUESTION 278 Company A has deployed a VCS Control and is attempting to register a third-party endpoint. Which option could be the cause of this registration failure? A. The engineer has confirmed that no traffic is being blocked for the endpoint and it is receiving a valid IP address. only with VCS Expressway. Cisco Unified Communications Manager is required in addition to the VCS Control.exam. When is the RSVP path and reservation message sent and received? A.245 capabilities negotiation is completed. C.com 144 . Answer: C QUESTION 279 How many active gatekeepers can you define in a local zone? A. B. Third-party endpoints are not compatible with VCS Control. The path is setup once the global command call rsvp-sync is configured. 1 2 5 10 15 unlimited Answer: A Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www. C. C. D. B. The path and reservation messages are sent and received immediately after the call setup message is received. The path and reservation messages are sent and received after the H. An incorrect SIP domain is configured on the VCS Control for the endpoint. B. Immediately after the call setup message is received and the reservation message is received after H. E. D.

Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected.) A.QUESTION 280 You recently implemented call redundancy at a new remote site. C. Get Latest & Actual 300-075 Exam's Question and Answers from exam. F. B. Configure an SRST reference. Answer: AB QUESTION 281 Which three tests can you perform to verify redundancy in the customer environment? (Choose three. Confirm that the site has an SRST reference that is correctly associated with the Cisco Unified Communications Manager group. Verify that all phones are registered to a second subscriber server. C. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers. + * % / . E. B. Confirm that the site devices are associated with a Cisco Unified Communications Manager group and that four Cisco Unified Communications Manager servers are available. C. Answer: A QUESTION 283 Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three.) A. E. B.exam.com 145 . Configure a phone NTP reference. Restart Cisco Unified Communications Manager services to confirm that the server is working correctly. D. Confirm that a calling search space is assigned to the voice gateway in Cisco Unified Communications Manager. Answer: ABC QUESTION 282 Which symbol is required for globalized call routing? A. http://www. E. and users report that calls are dropped when the remote site supposedly is in SRST. Check the Region settings in Cisco Unified Communications Manager. F. D. B. Verify that the H. Verify that SCCP fallback is configured in Cisco Unified Communications Manager. Confirm that SRST is configured on the voice gateway. D. Verify that media resources fail over to a secondary subscriber server when the publisher fails.323 redundant connection is active.) A. Which two actions must you take to troubleshoot the problem? (Choose two.

All media streams are necessarily routed through the central office for calls to establish correctly.exam. VCS Expressway is deployed and traversal server zone is set up there. B. Configure voice register pool. Overlapping DID ranges are allocated to each site. The maximum number of IP phones are in use at each remote site. MoH cannot be provided for the remote sites. what happens if a user logs into a phone for which the user does not have a user device profile? A. Call Hold B. Configure the SIP registrar. C. If a default device profile for this phone has been configured. When a traversal zone is set up on VCS Control only outbound calls are possible. To facilitate external calls.) A. it is loaded. Which option could be the cause of this issue? A.com 146 . http://www. Answer: BCE QUESTION 284 Company X has deployed a VCS Control with a local zone and a traversal client zone. D. C. D. Video endpoints inside Company X have registered but are unable to receive calls from outside endpoints. Configure voice register global dn. D. F. Every user within Enterprise X is assigned a directory number of 5 digits. C. The traversal zone on the VCS Control does not have a search rule configured. B. Answer: D QUESTION 285 When considering Extension Mobility. Answer: B QUESTION 286 The network administrator at Enterprise X is creating the guidelines for a new IPT deployment consisting of a large number of remote offices. The local zone on the VCS Control does not have a search rule configured. B. Which option might cause an issue in a multisite deployment? A. The phone reboots with an error. The access control list on the VCS Control must be updated with the IP for the external users.C. D. The user cannot log in. E. Configure telephony service. Call Park Get Latest & Actual 300-075 Exam's Question and Answers from exam. Answer: A QUESTION 287 Which three options are supplementary services that are affected by MTP? (Choose three. Call Transfer C. Another user device profile is loaded.

D. E.) A.) A. D.323 registration? A. B. which configuration element is recommended for endpoint H. Call Pickup E. B. Call Back Answer: ABC QUESTION 288 Which two configurable options are available to enable Early Offer for calls over a Cisco Unified Communications Manager SIP trunk? (Choose two.com 147 . http://www. B. B. D. No Media Termination Point Required Media Termination Point Required Accept Audio Codec Preferences in Received Offer Early Offer support for voice and video calls Mandatory (insert MTP if needed) Use Trusted Relay Point Answer: BD QUESTION 289 Which option best describes a service that assembles a network model from configured locations and link data in one or more clusters? A. C. DNS SRV records pointing to the VCS cluster name static IP addresses hostname of the VCS cluster configuration master hostname of the VCS cluster member peer Answer: A QUESTION 291 Which three options are overlapping parameters for roaming when a device is configured for Device Mobility? (Choose three. D. Speed Dial F. D. MRGL location network locale codec extension Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam. E. C. C. C. LBM Weight LBM Hub Shadow Answer: A QUESTION 290 In the case of a VCS cluster.

B. E.) A.com 148 . D.F. The Media Exchange Interface Capability Timer must be set to less than 20.323 gateway with Cisco Unified Communications Manager? (Choose two. otherwise they cannot log in elsewhere. The user must ensure that their main endpoint is online and registered.323 gateway must be configured use the same TCP port for H. B. The user device profile is not associated to the correct end user.) A. RTMT phone menu Cisco Unified Serviceability phone webpage Answer: BD QUESTION 294 The administrator at Company X is trying to set up Extension Mobility and has done these steps: . Answer: AB QUESTION 293 In which two locations can you verify that a phone has a standby Cisco Unified Communications Manager? (Choose two. The username must be numeric only and must match the DN. C. B.exam. The H. http://www. Answer: AC QUESTION 295 When configuring a video ISDN gateway. C. The Media Exchange Timer must be set to less than 20. device pool Answer: ABC QUESTION 292 Which two options are requirements for deploying an H. The Extension Mobility service has not been enabled under the Cisco Unified Serviceability Page. C.Set up end users accounts for the users who need to roam . E. Cisco Unified Communications Manager and the H. D. Which two options are the two reasons for this issue? (Choose two. Extension Mobility has not been enabled under Enterprise Parameters.) A. Cisco voicemail ports must be active.Set up a device profile for the type of phones users will be allowed to log in Users have reported to the administrator that they are unable to log in to the phones designated for Extension Mobility. D. which two actions are requirements for the Cisco Get Latest & Actual 300-075 Exam's Question and Answers from exam.245TCSTimeout timer must be set to at least 25.323 calls.

F. F. Select the SRTP Allowed check box on the SIP trunk.Preferred Architecture for Enterprise Collaboration? (Choose two. E. D. D. F. G. http://www. C. as a suffix. Use an * (asterisk) at the end of each ISDN number.) A. Use H.) A. Which two configurations are required in the Cisco Unified Communications Manager regions to provide the most suitable use of bandwidth while preserving the call quality? (Choose two. Use an ! (exclamation point) at the end of each ISDN number. Enable the Media Termination Point Required option on the SIP trunk.323 instead of SIP. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager servers. B.) A. Use SIP instead of H. Execute the isdn switch-type primary-ni command globally. D. Perform dial string manipulation on Cisco Unified Communications Manager. E. E. Enable application-level authorization Accept presence subscription Accept out-of-dialog refer Accept unsolicited notification Accept replaces header Transmit security status Allow charging header Answer: DE QUESTION 298 Which two configurations can you perform to allow Cisco Unified Communications Manager SIP trunks to send an offer in the INVITE? (Choose two. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile. g729 codec for intraregion calling g722/g711 codec for interregion calling g729 codec for interregion calling g722/g711 for intraregion calling g729 codec for all calling g722/g711 codec for all calling Answer: CD QUESTION 297 Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two) A. E. as a suffix. B.exam. C. Select the Display IE Delivery check box in the gateway configuration.323. Answer: AB QUESTION 296 Company X has three locations connected via a low bandwidth WAN. Get Latest & Actual 300-075 Exam's Question and Answers from exam. C. D. C. B.com 149 . B.

Which firewall and ACL configuration must you perform to allow the MCGP gateways to function correctly? A. It configures a standby Cisco Unified CME. It creates dial peers. Expressway-C Cisco Unified Communications Manager Cisco IM and P Expressway-E VCS Control Answer: D QUESTION 301 Refer to the exhibit. Block access to TCP ports 2427 and 2428. D. B. D. Open access to all TCP and UDP ports. E. E. Allow access to TCP port 1720. E. Allow access to TCP port 2428. B.Answer: AB QUESTION 299 You are deploying a Cisco Unified Communications Manager solution with MGCP gateways at multiple locations. D. Block TCP port 1720. It implements Cisco United CME redundancy. Which option describes the effect of this configuration? A. It implements HSRP. Get Latest & Actual 300-075 Exam's Question and Answers from exam. F. B. C.com 150 . Answer: A QUESTION 300 Which device must be accessible from the public Internet in a Collaboration Edge environment? A. It implements Cisco IOS redundancy. http://www. It configures failover.exam. C. C.

registering the router as a client with the SAF network providing publishing services to the SAF network subscribing to SAF network services registering Cisco Unified Communications Manager subscribers with the publisher starting Cisco Unified Communications Manager services throughout the cluster integrating with Cisco IM and Presence for additional services Answer: ABC QUESTION 305 Which option indicates the best QoS parameters for interactive video? Get Latest & Actual 300-075 Exam's Question and Answers from exam. Expressway-C to Cisco Unified Communications Manager Expressway-C to Expressway-E Expressway-E to outside-located endpoint Expressway-E to Cisco Unified Communications Manager Expressway-C to internal endpoint Answer: BC QUESTION 303 Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three. B. D. The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061. A SIP trunk security profile must be configured with Device Security Mode set to TLS.) A.Answer: A QUESTION 302 On which two call legs is the media encryption enforced in a Collaboration Edge design? (Choose two. E. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.com 151 . Answer: ACE QUESTION 304 Which three options describe the main functions of SAF Clients? (Choose three. C. F. The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On. G. D. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager. A SIP trunk security profile must be configured with the X. http://www. F.509 Subject Name from the VCS certificate. B. E. C. C.exam. D.) A. E.) A. B.

db. They are generated in the format telco. D. C. Audio Codec Video Call Bandwidth Link Loss Type Location Description Immersive Bandwidth Real Time Protocol Answer: ABC QUESTION 307 Which three items must you configure to enable SAF Call Control Discovery? (Choose three. F. F. 1% Max Loss.cucm-publisher.instance. 160 ms One-way Latency.saf.replicate.com 152 . B. 100 ms One-way Latency. D. 5 s One-way Latency. E.) A. E.) A. 30 ms Jitter. B. 150 ms One-way Latency.data.asf@domain. D. They are 32-bit decimal identifiers. search rules Get Latest & Actual 300-075 Exam's Question and Answers from exam.exam. They are generated in the format service:sub. D.cisco.instance.A.fifty. the SIP or H.323 and SIP endpoints. 30 ms Jitter.local. F.instance. Which component allows for standardized caller addresses between the endpoints? A. 60 ms Jitter.matrix. 20% Overprovisioning 1% Max Loss. 20% Overprovisioning 0% Max Loss. E. 10% Overprovisioning Answer: A QUESTION 306 Which three configuration settings are included in a default region configuration? (Choose three.saf-forwader. 30 ms Jitter. They are generated in the format data.323 trunk hosted DN groups hosted DN patterns route patterns a calling search space translation patterns Answer: ABC QUESTION 308 Which two statements about SAF service identifier numbers are true? (Choose two. B. http://www. C.) A.saf. They are 16-bit decimal identifiers. They are generated in the format data-source:sub-service:instance. B. Answer: AB QUESTION 309 A voice engineer is enabling video capabilities between H. C. 20% Overprovisioning 5% Max Loss.local.service:instance. C.

http://www.B. What happens when the primary node comes back online? Get Latest & Actual 300-075 Exam's Question and Answers from exam. B. E. transform Answer: D QUESTION 310 Which two statements about Cisco Unified Communications Manager Extension Mobility are true? (Choose two.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan. A device can adopt a user profile even when no user is logged in.exam.html#wp11531 6 QUESTION 312 How many nodes can a phone establish a connection to at the same time? A.cisco.) A. B. 4 3 1 2 Answer: D QUESTION 313 Company X has a primary and a backup Cisco Unified Communications Manager instance. SIP route pattern C. Configure the called-party transformation settings for incoming calls on H. C. Configure SIP trunks between Cisco Unified Communications Manager clusters. The administrator had to do maintenance on the primary node and did a shutdown. C. policy service D. An autogenerated device profiles can be loaded on a device at the same time as a user profile. Devices can be configured to allow more than one user to be logged in at the same time.323 gateways. E. C. D. Configure translation patterns in the partitions used by the gateway calling search space. in which three ways can you enable ingress gateways to process calls? (Choose three.com 153 . B.) A. Answer: ABF Explanation: http://www. After an autogenerated device profile is created. A device profile has most of the same attributes as a physical device. F. which resulted in a failover to the backup node. Configure a remote site device pool. D. Configure the gateway with prefix digits to add necessary country and region codes. Answer: CD QUESTION 311 When you configure a globalized dial plan. you can associate it with one or more users. D. Configure a hunt group.

The primary node becomes the backup node. B. PVDM or DSP resource LTI local transcode resource ref2833 one audio codec T1 PRI card Answer: AB QUESTION 316 The Cisco Unified Communications system of a company has five types of devices: •Cisco Jabber Desktop •CP-7965 •DX-650 •EX-60 •MX-200 Which two types of devices are affected when an engineer changes the DSCP for Video Calls service parameter? (Choose two. Nothing. D. B. E.exam. Which option could be the cause of this issue? A. DX-650 Cisco Jabber Desktop CP-7965 EX-60 MX-200 Get Latest & Actual 300-075 Exam's Question and Answers from exam. To facilitate external calls. E.com 154 . The backup node must be shut down first to allow the endpoints to realize that the primary node is online again. D. C. the endpoints only failover when the node they lose connection to their registered node. D.) A. The access control list on the VCS Control must be updated with the IP for the external users. D. When a traversal zone is set up on VCS Control only outbound calls are possible. http://www. C. Endpoints detect that the primary is back and reregisters automatically. VCS Expressway is deployed and traversal server zone is set up there. B. Answer: B QUESTION 314 Company X has deployed a VCS Control with a local zone and a traversal client zone. Answer: A QUESTION 315 Which two options are requirements for hardware MTP on Cisco IOS routers? (Choose two. but are unable to receive calls from outside endpoints.A. B.) A. The local zone on the VCS Control does not have a search rule configured. Video endpoints inside Company X have registered. C. The traversal zone on the VCS Control does not have a search rule configured. C.

D. Answer: BE Explanation: http://www.exam. E.html QUESTION 318 Which message does a Cisco VCS use to monitor the Presence status of endpoints? Get Latest & Actual 300-075 Exam's Question and Answers from exam.) A.Answer: AB QUESTION 317 Refer to the exhibit. B. Which two properties are the most likely reasons for this issue? (Choose two.com 155 . The router does not have a route back from the DMZ to the internal network.User A can hear user C. An engineer receives a ticket to troubleshoot a one-way audio issue with these symptoms: . . C. however user cannot hear user A. The Cisco VCS Expressway is not responding to the SIP INVITE coming from the Cisco VCS Control.com/c/en/us/support/docs/voice/voice-quality/5219-fix-1way-voice. however user cannot hear user . The Cisco EX60 default gateway of User C is missing from the network configuration.User A can hear user and vice versa.cisco. . http://www. The Cisco EX60 of User C is not responding to requests coming from the TMS server. The NAT device is allowing only RTP/RTCP ports from the internal network to the DMZ.User can heat user C.

B.A. and Network Locale. Configure an SRST reference. Configure a phone NTP reference. Which option achieves this aim? A. D.) A. AAR Group. search rules B. B.com. Configure voice register pool. Configure telephony service. E.com 156 . D. transforms Get Latest & Actual 300-075 Exam's Question and Answers from exam. E. start-call in-call end-call call-ended call-started registration Answer: F QUESTION 319 Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three. Answer: ACE QUESTION 320 Which three options are overlapping parameters for roaming when a device is configured for Device Mobility? (Choose three.exam. D. http://www. device pool location network locale codec MRGL extension Answer: BCE Explanation: The overlapping parameters for roaming-sensitive settings are Media Resource Group List. The overlapping parameters for the Device Mobility-related settings are Calling Search Space (called Device Mobility Calling Search Space at the device pool). B.) A. Overlapping parameters configured at the phone have higher priority than settings at the home device pool and lower priority than settings at the roaming device pool. C. E. C. Configure voice register global dn. C. https://supportforums.com/document/77096/device-mobility QUESTION 321 An engineer is working on a Cisco VCS Control routing configuration and wants users to be able to dial ccnpcollab and have calls routed to ccnpcollab@cisco. Location. F. F. and AAR Calling Search Space. F. Configure the SIP registrar.cisco.

225 trunk MGCP gateway SIP trunk Answer: B Explanation: http://www.html QUESTION 323 An engineer must enable video desktop sharing between a Cisco Unified Communications Manager registered video endpoint and a Cisco VCS registered video endpoint.exam.263 BFCP Answer: E QUESTION 324 An engineer must resolve a "VIDEO" call failure issue. then call policy makes since. call policy Answer: B Explanation: Although Call Policy could be used. D. I would never use Call Policy in this capacity. access rules D. When using RTMT. Which protocol must be enabled in SIP profile for VCS SIP trunk on Cisco Unified Communications Manager? A.C. Still.323 gateway SCCP gateway H. lack of audio bandwidth B. C. lack of video bandwidth C.264 H. and not for other aliases that might be dialed without a domain. B. D. H.com/c/en/us/products/collateral/unified-communications/vg-seriesgateways/product_data_sheet09186a00801d87f6. Which option is the cause of the call failure? A. typically this type of alias change is done using transforms (either pre-search transforms or search rule transforms). nor does Cisco recommend this. the engineer notices that the Location Bandwidth Manager-OutOfResources counter is showing a positive value. lack of transcoding resources Get Latest & Actual 300-075 Exam's Question and Answers from exam. Which type of gateway or trunk on Cisco Unified Communication Manager for the Cisco VG310 must the administrator set up to allow the phones to have the call pickup feature? A. E. If this change is only intended for the ccnpcollab alias being dialed.com 157 . http://www. C.224 H. E. QUESTION 322 An administrator is setting up analog phones that connect to a Cisco VG310. Call Policy could be justified as the correct answer based on how the question is interpreted.cisco. RDP H. B.

exam. Resolve FQDN using DNS type SRV record. Ensure FQDN is used in SIP Request header. AAR CFUR LRG SRST Answer: C QUESTION 327 An engineer is configuring a SIP profile for Cisco VCS SIP trunk on Cisco Unified Communications Manager and enables the option "Use Fully Qualified Domain Name" in SIP Requests. E. Which result is achieved by enabling this option? A. D. lack of audio or video bandwidth E. B. Which technology provides this ability? A.D.2. C. B. The Expressway-C Traversal Client username/password do not match the Expressway-E Traversal Server username/password. and Expressway-E.50. B. lack of conferencing resources Answer: B QUESTION 325 While troubleshooting a connectivity issue between Cisco Unified Communications Manager. Event="Authentication Failed" Service="SIP" Src-ip="10. D. C.com 158 . The Expressway-C Traversal Server username/password do not match the Expressway-E Traversal Zone username/password. D. The Expressway-C Traversal Zone username/password do not match the Expressway-E Traversal Client username/password. Ensure FQDN is used in SIP Identity header. The Expressway-C Traversal Zone username/password do not match the Expressway-E Traversal Zone username/password. C. http://www. Resolve FQDN using DNS type A record. Answer: B QUESTION 326 An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case the call limit triggers. Expressway-C. an engineer sees this output in the Expressway-E logs.1" Src-port="25723" Detail="Incorrect authentication credential for user" Protocol "TLS" Method="OPTIONS" Level="1" What is the cause of this issue? A. The Expressway-C Traversal Server username/password do not match the Expressway-E Traversal Client username/password. Get Latest & Actual 300-075 Exam's Question and Answers from exam.

Answer: D QUESTION 328 Which two options are functionalities of subzones in a Cisco VCS deployment? (Choose two. the “Unified Communications Mobile and Remote Access via Cisco VCS Deployment Guide” identified port 443 as the administrative access port from pubic internet to VCS Expressway. when you require encrypted calls to endpoints on your corporate LAN C. Resolve names outside of the direct control of the Cisco VCS that exist on the public Internet.exam. Manage bandwidth to restrict standard definition endpoints from using more than 2 Mb of bandwidth. B. Answer: DE QUESTION 329 Which situation requires TCP port 443 to be open for packets that are sourced from the Internet with a destination in the corporate DMZ? A. Traverse a firewall from a protected network to a public or DMZ network. D. when video endpoints that reside on the Internet require administrative access to the Cisco Expressway Edge B. No call session of any sort on a VCS or Expressway use port 443. Which option describes the effect of this configuration? Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X81/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-1-1.cisco. when you require administrative access to the Cisco Expressway Edge from the Internet Answer: D Explanation: VCS/Expressway servers only use port 443 for administrative access. Also.pdf QUESTION 330 Refer to the exhibit. Connect to another Cisco VCS on the same side of the firewall to extend dialing capabilities. http://www. authentication. and media encryption policies.) A.com 159 . when you want to enable calls to web applications by using HTTP D. Apply registration. C. E.

It creates dial peers.html#wp1098521 QUESTION 332 Which three tests can you perform to verify redundancy in the customer environment? (Choose three. D. E. It configures failover. It implements HSRP.) A. F.com 160 . http://www. Get Latest & Actual 300-075 Exam's Question and Answers from exam. It implements Cisco IOS redundancy. D. D. Verify that SCCP fallback is configured in Cisco Unified Communications Manager. E. F. B.) A. C. C. Verify that all phones are registered to a second subscriber server. It implements Cisco United CME redundancy.A. B. Answer: A QUESTION 331 Which two types of trunks can support Cisco Unified Communications Manager? (Choose two.cisco. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected. B. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers. C. It configures a standby Cisco Unified E.225 trunks CO trunks POTS trunks Answer: CD Explanation: http://www.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/accm-851cm/a08trnk. switch port trunks PIMG trunks SIP trunks H.exam.

E. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
F. Verify that the H.323 redundant connection is active.
Answer: ABE

QUESTION 333
Which option indicates the best QoS parameters for interactive video?
A.
B.
C.
D.

0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning
1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning
1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning
5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning

Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoSSRND-Book/QoSIntro.html (interactive video)

QUESTION 334
Which three items must you configure to enable SAF Call Control Discovery? (Choose three.)
A.
B.
C.
D.
E.
F.

a calling search space
hosted DN patterns
translation patterns
route patterns
the SIP or H.323 trunk
hosted DN groups

Answer: BEF

QUESTION 335
The Cisco Unified Communications system of a company has five types of devices:
•Cisco Jabber Desktop
•CP-7965
•DX-650
•EX-60
•MX-200
Which two types of devices are affected when an engineer changes the DSCP for TelePresence
Calls service parameter? (Choose two.)
A.
B.
C.
D.
E.

a Cisco Jabber Desktop
DX-650
CP-7965
MX-200
EX-60

Answer: DE

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

161

QUESTION 336
A presales engineer is working on a quote for a major customer and must evaluate how many
Cisco VCS Expressway traversal call licenses for which to plan. Calls to and from which three
routes must the engineer include in the tally? (Choose three.)
A.
B.
C.
D.
E.
F.

gateway
Cisco 9971 Endpoint
border controllers
gatekeeper
SIP trunk
VCS

Answer: CDF

QUESTION 337
Which three devices or applications support call preservation? (Choose three.)
A.
B.
C.
D.
E.
F.
G.
H.

a software conference bridge
Cisco Unified IP Phone 7962G
an annunciator
SIP trunks
JTAPI applications
TAPI applications
CTI applications
third-party H.323 endpoints

Answer: ABD

QUESTION 338
An engineer is configuring Global Dial Plan Replication and wants to prevent the local cluster
from routing the Vice President number 5555555555 to the remote cluster.
Which action accomplishes this task?
A.
B.
C.
D.

Create a block route pattern.
Create a block learned pattern.
Create a block transformation pattern.
Create a block translation pattern.

Answer: B
Explanation:
GDPR using ILS allows for blocking learned patterns to be configured in the CUCM.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F
3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-featuresservices-guide-100_chapter_011101.html#CUCM_TK_BDDD9061_00

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

162

QUESTION 339
An administrator is visiting a remote site that has on-net calls with headquarters and one voice
gateway for PSTN calls. When using RTMT to monitor the bandwidth utilization of the remote
site, the administrator notices the OutOfResources counter for the site in LBM has been
increasing slowly in last two weeks, but no call failure reports have been sent from this site.
Which description about this issue is true?
A.
B.
C.
D.

The bandwidth settings of the site are fulfilling on-net call volume.
AAR is routing some of the calls.
The location-based CAC does not work properly.
The LBM service is malfunctioning.

Answer: B

QUESTION 340
An engineer is configuring URI calling within the same cluster.
Which two actions must be taken to accomplish this configuration? (Choose two.)
A.
B.
C.
D.
E.
F.
G.
H.

Configure SIP route patterns.
Configure the directory URI partition and calling search space.
Associate the directory URIs to directory numbers.
Activate the URI service in Cisco Unified Serviceability.
Configure SIP trunk.
Assign directory URIs to users.
Configure the SIP profile.
Configure the URI service parameters.

Answer: FG

QUESTION 341
Which two steps must you take when implementing TEHO in your environment? (Choose two.)
A.
B.
C.
D.
E.
F.

Implement local failover.
Implement SIP to POTS.
Load-balance PRI connections.
Load-balance route lists within the cluster.
Implement ICT trunks to remote locations.
Implement centralized failover.

Get Latest & Actual 300-075 Exam's Question and Answers from exam.
http://www.exam.com

163

The ccm-manager fallback command is configured incorrectly on the voice gateway. B.Answer: AF QUESTION 342 You have deployed a Cisco 2821 ISR to perform as an SRST voice gateway at a remote site. C.) A.) A. Some Phones at the remote site are assigned a device pool without SRST reference. C. h. Answer: AC QUESTION 343 Which two functions can be implemented without MTP resources? A.com 164 . http://www. E. D.323 fast start IPV6 -IPV4 transform DTMF inband RTP-NTE (rfc2833) Sip delay offer Multicast MOH Answer: DE QUESTION 344 An engineer is setting up a Cisco VCS Cluster with SIP endpoints only. The ccm-manager fallback-mgcp command is configured incorrectly on the voice gateway. E. During a network failure between the remote site and the central office. B. MGRL TEHO CER AAR SAF click-to-call Get Latest & Actual 300-075 Exam's Question and Answers from exam.323 SCCP MGCP Answer: B QUESTION 345 Which three globalization dialing functions are enhanced in Cisco Unified Communications Manager 7. Which two options are potential causes of the problem? (Choose two. F. D. D.exam. SIP H. B. While configuring the Cisco VCS peers. which signaling protocol is used between peers to determine the best route for calls? A. B. E. C.x and later? (Choose three. The site has exceeded the number of simultaneous calls allowed in SRST mode. some of the phones located at the remote site are unable to make phone calls. The site has exceeded the number of SRST endpoints supported by the voice gateway. D. C.

B. Which option must be configured to complete the Cisco VCS Expressway system configuration? A. E. QUESTION 346 Which two commands verify Cisco IP Phone registration? (Choose two. D. Get Latest & Actual 300-075 Exam's Question and Answers from exam. http://www.Answer: BCD Explanation: TEHO stands for Tail End Hop Off. an Extension Mobility user is unable to log in to a different IP phone at a remote office. C. F. C. Which option is a possible reason for the problem? A. NTP server SIP server LDAP server DHCP server DNS server Cisco Unified Communications Manager IP address Answer: E QUESTION 348 After forgetting to log out of his IP phone in the main office.com 165 . These are the correct answers according to the Cisco Collaboration System SRND. The phone at the remote location is a different model than the phone in the user's main office. E. B. D. CER stands for Cisco Emergency Responder and AAR stands for Automated Alternate Routing.exam.) A. An engineer is deploying a new Cisco VCS Expressway for a company and has configured the IP address and the system name. the engineer sees this output. After logging into the Cisco VCS Expressway admin page. show telephony-service ephone-dn show voice register session-server show ephone registered show ccm-manager hosts show sip-ua status registrar Answer: CE QUESTION 347 Refer to the exhibit.

E. During troubleshooting. and your employee's directory numbers are 4digit numbers.com 166 . SRST without MGCP fallback SRST with VoIP dial peers to Cisco Unified Communications Manager Express SRST with MGCP fallback Cisco Unified Communications Manager Express in SRST mode Answer: D QUESTION 350 An engineer has configured a Cisco EX60 to register with a Cisco VCS-C. Where can an engineer verify the default DSCP value of AF41? A. B. The device pool is misconfigured.B. enterprise phone configuration common phone profile service parameters enterprise parameters Answer: C QUESTION 352 Your company's main number is 408-526-7209. C. D. Answer: C QUESTION 349 Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure? A. D. C. D. D. C. B. gatekeeper MCU default gateway TMS DNS Answer: A QUESTION 351 An engineer is configuring a new DX-80 in Cisco Unified Communications Manager. C. http://www. The user can log in to only one device at a time. translation pattern Get Latest & Actual 300-075 Exam's Question and Answers from exam. AAR group C.exam. The user's Extension Mobility profile is misconfigured. calling party transformation pattern B. but the device is not showing up as registered. which component will the engineer likely find missing in the configuration? A. B. Which option should be configured if you want outgoing calls from 4-digit internal directory number to be presented as a 10-digit number? A.

Cisco VCS Control and Cisco VCS Expressway support static NAT. B. B. D.) A.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/bccm-801cm/b02regio.cisco. F.com 167 . SIP TCP/TLS ports must be opened from internal to DMZ and vice versa. Which statement about when user A calls user using SIP is true? A. Deploying a Cisco VCS Control inside a NAT mandates the use of the Advanced Networking Get Latest & Actual 300-075 Exam's Question and Answers from exam. C.exam. C.html#wp1077135 QUESTION 354 Refer to the exhibit. http://www. E.D. Immersive Bandwidth Video Call Bandwidth Audio Codec Link Loss Type Real Time Protocol Location Description Answer: BCD Explanation: http://www. route pattern Answer: A QUESTION 353 Which three configuration settings are included in a default region configuration? (Choose three.

Pattern type : Regex Pattern string : @cisco.option key.exam. E. State : Disabled A. There are three fields populated with "CCNPCOLAB"...com" Mode : ... C.com sent as CCNPCOLAB Sent as CCNPCOLAB@cisco.com Answer: C QUESTION 356 What are the tasks required to route calls from H323 to SIP and viceversa? (Choose two.. http://www. B. D. D.... C. Replace string : ccnpcollab Target : ...com 168 . D.. "Add Suffix" and "@Cisco. Config-protocols-Interworking-On Config-protocols-Interworking-Off Config-protocols-Interworking-registered only Config-protocols-Sip-Config-Mode-On Config-protocols-H323-H323Mode-On Answer: AE Get Latest & Actual 300-075 Exam's Question and Answers from exam. Answer: A QUESTION 355 An engineer is troubleshooting a dial path etc" and it gives a config snapshot. Can not route call Sent to Cisco...com Pattern Behaviour :.) A.. RT and RTCP ports must be opened at the firewall from internal to DMZ and vice versa. B.

Sign up to vote on this title
UsefulNot useful